Composites World / NetComposites

Connecting you to the composites industry


NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.

On 1st January 2020, NetComposites' media assets including, newsletters and conferences were transferred to Composites World (Gardner Business Media).

This site is no longer being updated. Please direct all enquiries to

For further details see our joint press release.

Victrex Shows New Composites for the First Time at JEC World Composites Show

Victrex Shows New Composites for the First Time at JEC World Composites Show

  • Tuesday, 1st March 2016
  • Reading time: about 4 minutes

Victrex claims that more than 35,000 aircraft are predicted to be needed worldwide over the next 20 years.

It’s in this context that manufacturers are fiercely competing to increase the speed of manufacture and reduce the cost and weight of their aircraft, focusing in particular on the use of composites. Its intense interest in this class of solutions is now set to be given an additional boost by the newly developed VICTREX AE250 Composites, a PAEK-based product family. The unidirectional tapes (UDT) and laminate panels offer clear benefits in terms of speed of component manufacture and installation. This new Victrex product group will be on display for the first time in Europe at the JEC World Composites Show in Paris, France in March, and its potential for use with hybrid moulding technology is the key theme at the stand.

Victrex says that the new VICTREX AE250 composites open up a whole new dimension for the aerospace industry, hence the confident motto of the Victrex stand at the JEC show: ‘Changing the Equation in Aerospace Composites.’ “We believe that our materials and technology solutions will continue to tilt market share in favour of composites in the aircraft construction industry. They help to reduce costs, achieve weight savings, offer more design freedom and provide durability and fast production times,” explains Tim Herr, Aerospace Director at Victrex, in the run-up to the trade show.

Victrex adds, specifically designed for the aerospace industry, its VICTREX AE250 composites enable the production of continuously-reinforced components that perform extremely well under load. Components manufactured in this way include brackets, clamps, clips and housings used throughout the aircraft in primary and secondary structures, from the cabin – including seats – to the engines and fuel tank.

In addition to providing up to a 60% reduction in weight compared with metals, the main advantage of the next generation high-strength, continuously-reinforced composites is the reduction of manufacturing time and system costs. This is the result of smarter designs and semi- or fully-automated mass production using a new kind of hybrid moulding technology. The innovative PAEK composites bridge the gap between composite materials and injection moulding and enable the production of complex composite components that were previously impossible to manufacture.

According to Victrex, the hybrid moulding process enables VICTREX AE250 composites in the form of inserts analogue to metals, to be overmoulded with short-fibre reinforced VICTREX PEEK polymers. This allows engineers to combine the mechanical properties of the composites with the design flexibility and fast production times of the injection-moulding process. It is not necessary to pre-heat the VICTREX AE250 organo sheets nearly up to the melting temperature before inserting them into the injection-moulding press. The benefits resulting from the use of the Victrex composites include improved cycle times, reduced energy consumption, elimination of secondary process steps, reduced amount of scrap and also savings in installation expense, all of which can make a substantial contribution to reducing overall system costs. “This technology paves the way for components which

Victrex adds, composites made from its high-performance thermoplastics are up to 60% lighter than AISI 4130 steel, a tough chromium-nickel-molybdenum alloy widely used in aviation applications. They can also achieve significant weight advantages over lightweight metals, including TA6V titanium, 7075-T6 aluminium or ZK60A-T5 magnesium. The high-performance composites are not only lighter than these metals, they also outperform them. For example, the specific strength of the composites is five times that of AISI 4130 steel.

PEEK solutions from the UK-based international company have been used in the aerospace industry for over 25 years and have been certified by well-known aircraft manufacturers. For example, Airbus used the first VICTREX PAEK-based primary structural component in the door of the Airbus A350XWB. The Chinese aircraft manufacturer COMAC (Commercial Aircraft Corporation of China) is using VICTREX Pipes instead of metal pipes to protect high-voltage cables in the lead-up to launch of its first commercial aircraft.

Visit Victrex in Hall 5A, Stand J6.

Image provided by Victrex

For more information visit:

Share this article

More News

Comments (0)

Leave your comment