NetComposites

Connecting you to the composites industry

Advertisement

Sumitomo Chemical Develop New LCPs

  • Wednesday, 31st July 2019
  • 0 comments
  • Reading time: about 5 minutes

As interest in and availability of products for the internet of things (IoT), autonomous vehicles, 5G cellular networks, smart cities, and video-streaming services increase, the need to be able to push far greater quantities of data through often much smaller wired and wireless devices at much higher speeds becomes more important and challenging. 

To assure high-quality as well as high-speed data transfer, all components used in electronic interconnects are being scrutinised to minimise signal loss/decay, distortion, and interference. Often, that necessitates that manufacturers upgrade performance of high-speed connectors, which, in turn, has led to the development of three new grades of high-performance liquid crystal polymers (LCPs) from Sumitomo Chemical Advanced Technologies to meet the increasing demands of this segment. 

Trends in device miniaturisation (and connector miniaturisation and sub-miniaturisation with requirements for comparable or higher mechanical performance in thinner wallstock) plus use of higher density interconnects have reduced space and increased complexity on printed circuit boards (PCBs). At the same time, the market is pushing for significantly faster transmission speeds — from 3, 6, and 12 to 25, 50 and even 100 gigabytes per second. Putting so many high-speed, high-frequency interconnects in such close proximity increases transmission loads and, along with it, crosstalk, which increase the need for connector materials with lower dielectric constants and dissipation factors. Crosstalk between mobile phones is annoying; crosstalk between autonomous vehicles could prove deadly. Regular stories about high-profile website hacks is a constant reminder of the need to protect data integrity without impacting signal speed. Additionally, faster processing speeds and higher circuit density with lower profile, thinner connectors make thermal management a more pressing issue, which has increased thermal requirements for materials used for interconnects. To prevent data bottlenecks, manufacturers will need to continually upgrade connector performance to assure more reliable data transmission with greater clarity. 

In order to better meet the changing needs of connector manufacturers, Sumitomo Chemical has developed three new SumikaSuper LCP grades specifically designed for high-speed connectors, including backplanes and automotive connectors for infotainment. SumikaSuper E6205L is a lower dielectric constant polymer that is ideal for connectors requiring higher data transfer speeds. However, for connectors that require both a lower dielectric constant as well as a lower dissipation factor (lower loss tangent), a unique LCP with a different chemical structure called SumikaSuper SR1205L may better meet requirements depending on connector geometry and design. For high-speed digital and wireless devices where electromagnetic interference (EMI) is a concern, owing to its deterioration of signal quality, a third grade, SumikaSuper SZ6911EM has been specifically designed to provide EMI shielding. This grade incorporates ferromagnetic particles that convert incident EM waves into heat energy, which subsequently can be bled off by thermal management systems. Each new grade benefits from Sumitomo Chemical’s polymer synthesis and compounding expertise. 

LCPs are a family of polymers that produce thermoplastic parts with unique processing characteristics and extremely high performance, so they are commonly used to replace metals, ceramics, and other plastics due to high thermal resistance, excellent flowability, and opportunities for weight or wallstock reductions. Most commercial LCPs are aromatic polyesters characterised by high thermal and mechanical performance, inherent flame retardancy, good weatherability, excellent electrical properties, high resistance to stress cracking, and chemical inertness. This makes them ideal for use in electrical and electronic components (including fibre optic cables, PCBs, chip carriers, connectors (conventional, radio-frequency (RF), and fibre optic), and other surface-mount components), microelectromechanical systems (MEMS), automotive applications (including components for ignition and transmission systems, lamp sockets, pump components, coil forms, and sensors), printer/copier/fax components, cookware, high-barrier/retort-processed food containers, plus components for chemical processing (including pumps, meters, and valves). 

Commonly processed via injection moulding, LCP parts can be joined via thermoplastic welding techniques, particularly ultrasonic and laser welding. Owing to the highly rigid structure of their molecular chains and their liquid crystalline nature, which tend to be nearly linear and to occupy a stacked orientation that maintains its order regardless of solid or liquid phase, LCPs are highly anisotropic. Essentially, primary bonds within an LCP polymer chain are highly attractive and hard to break, while secondary bonds between molecular chains are weaker and much easier to break. 

Although most thermoplastics and especially fibre-reinforced thermoplastics exhibit some degree of anisotropy after processing, the moulded properties of LCPs can be significantly different in flow and cross-flow directions, which requires some care when designing parts and tools for these polymers to take advantage of (and avoid the challenges of) this characteristic. The highly ordered and linear nature of these molecular chains provides LCPs with self-reinforcing properties in the flow direction and contribute to excellent mechanical properties. However, LCP’s high anisotropy also means that weldlines (where flow fronts with different molecular orientations converge) are weaker and thus prone to warpage and thermal-expansion differentials. Because of this, LCPs are typically reinforced with glass fibre and mineral fillers not so much to increase stiffness and strength, but to reduce anisotropy. 

Warpage can be reduced with proper gate design in the injection moulding tool. Because of their high performance, LCPs are priced accordingly. However, given their high melt flow rates, fast setup times, and low thermal expansion in the direction of flow, these polymers can be formed into thin-wall parts with short moulding cycles that deliver high performance at low mass and lower material usage — all of which help offset higher initial material costs. (They also can be moulded into large, thick-walled parts.) The thermal stability typical of LCPs enables processors to efficiently reuse regrind and recycle reject parts, which again reduces material losses and lowers effective part cost. 


Image provided by Sumitomo Chemical Advanced Technologies


For more information visit:


Share this article


Categories


Related News


Comments (0)

Sign in or create an account to join in the discussion.

Leave your comment

Advertisement

Upcoming Events

Advertisement

Advertisement

Advertisement

Follow us
Subscribe to our email newsletter

Subscribe to receive our weekly round-up of all the industry's latest news, jobs, events and more!

We'll always keep your personal details secure and will never share them with third parties for marketing purposes. You can unsubscribe at any time. For further details on how we may use your data, please visit our Privacy Policy.