NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.
On 1st January 2020, NetComposites' media assets including netcomposites.com, newsletters and conferences were transferred to Composites World (Gardner Business Media).
This site is no longer being updated. Please direct all enquiries to email@example.com.
For further details see our joint press release.
Providing boat builders and marine construction engineers with a bright white, UV-resistant two-part adhesive specifically formulated for marine applications, global adhesives supplier SCIGRIP is showcasing its SG100 Series methacrylate adhesives in Booth #1520 at the 2012 International Boat builders’ Exhibition & Conference (IBEX) in Louisville, Kentucky, US.
“The SG100 Series is part of SCIGRIP’s comprehensive offering of high-performance marine adhesive technologies,” explained Kirk Miller, SCIGRIP’s Regional Sales Manager. “The newly reformulated SG100 Series delivers superior adhesion properties, while requiring minimal surface preparation for bonding a wide range of materials used in boatbuilding and marine applications.”
SG100 Series are two-part methacrylate adhesives designed for application at a 10:1 adhesive/activator mix ratio, and feature a choice of either 15- or 40-minute working times, with fixture times of less than 30 and 80 minutes, respectively. SCIGRIP says the non-yellowing, UV-resistant adhesives are ideal for marine applications, with non-sag handling characteristics to facilitate application on non-level surfaces. They can be used to bond composite materials (epoxies, polyesters, vinyl esters or gel coats); metals (aluminium, carbon steel, stainless steel and coated metal); or thermoplastics (ABS, acrylics, PVC/CPVC and styrenics) with a minimum of surface preparation to reduce labour costs and production cycle times.
Adhesion properties of SG100 Series adhesives include a tensile strength of 2,800 – 3,200 psi (19 – 22 MPa); lap shear strength of 2,000 – 2,400 psi (13 – 16 MPa); and tensile modulus of 65,000 – 80,000 psi (448 – 552 MPa), measured at 75°F/24°C.
SG100 Series adhesives are available in dual-component 490 ml cartridges, and 5/50 gallon (19/189 liter) bulk containers for use with meter-mix dispensing equipment.
For more information visit: