NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.
On 1st January 2020, NetComposites' media assets including netcomposites.com, newsletters and conferences were transferred to Composites World (Gardner Business Media).
This site is no longer being updated. Please direct all enquiries to firstname.lastname@example.org.
For further details see our joint press release.
At Advanced Engineering 2018, RUCKS Maschinenbau will showcase its thermoforming press KV 297, which is used for making composite parts for the aviation industry.
Three objectives were essentially taken into consideration, when the plant was designed: realising the shortest possible cycle times, achieving reproducible results, and a high degree of energy efficiency. The centre part of the plant, optimised along these objectives, is an upstroke column press with a pressing force of 3000 kN and a closing speed of 200 mm/s. In order to reduce heat emission into the ambient area the 600 x 1200 mm press heating plates are divided each into three segments and provided with ample insulation. The division into segments enables the user to heat up exactly those areas that are needed for their tool. Thus they can reduce heating costs optimally. A further feature of the heating plate installation is that the three segments of the heating plate can be shifted horizontally by 1.5 mm. Top and bottom tool can therefore be aligned to each other perfectly.
The pre-heating station of the plant is provided with two ceramic infrared heaters. The maximum temperature of the upper and lower heaters is 570°C in order to heat up prepregs as fast as possible. By electrically adjusting the height of the infrared heater, the heat for the work piece can be dosed precisely. The heaters are encased to become an infrared oven to increase the energy efficiency. As this is only opened for the automatic transport of the prepregs, it contributes further to the energy efficiency.
The loading station is positioned behind the pre-heating station. Here the prepregs are placed in a U-shaped transport frame. So-called ‘finger-plates,’ which can be flexibly adjusted to the different prepregs within the transport frame, ascertain that the material is securely fixed. A servo-driven linear system transports the material automatically from the loading to the pressing station. The height-adjustable transport frame can be adjusted to the different tool heights in the press by means of synchronous multi-lifting devices. Due to the optimised coordination of the linear system, loading, pre-heating, and pressing station, the thermo-forming process is carried out fully automatically and guarantees reproducible results.
The machine is controlled by the control system RUxx Logic HP that has proved itself for years and is continuously further developed. With a graphically orientated user surface, touchscreen, online language selection, and internet communication, it fulfils customer requests for a modern and user-friendly operating concept. All processing parameters are recorded with the assistance of the RUDAS data recording system and can subsequently be evaluated and further processed.
RUCKS will exhibit on Stand E16 at Advanced Engineering 2018 on 31 October-1 November in Birmingham, UK.
Image provided by RUCKS
For more information visit: