17 April 2018
EconCore will unveil the latest developments in its thermoplastic honeycomb core production technology at NPE2018 on 7-11 May in Orlando, Fl...
17 April 2018
Following its strategy to address composites end-use industries specifically, JEC Group is organising The Future of Composites in Transporta...
17 April 2018
Velox is intensifying its activities in Eastern Europe and Russia and will exhibit at Plastpol on 22-25 May 2018 in Kielce, Poland, alongsid...
17 April 2018
Wabash and Carver will highlight their composite moulding presses at the SAMPE 2018 Conference & Exhibition on 23-24 May in Long Beach, ...
17 April 2018
AnalySwift is sponsoring the SAMPE 2018 Student Bridge Contest.
03 April 2018
Advanced Engineering 2018, the UK exhibition for advanced engineering professionals, is celebrating its 10th birthday by being bi...
03 April 2018
The next Marine-i Discovery Room event will shine a spotlight on composite materials and the vital role they will play in the marine industr...
27 March 2018
Composites Innovation 2018 will be focusing on emerging technologies and new innovations in the expansion of composites manufacturing, highl...
20 March 2018
The American Composites Manufacturers Association (ACMA) and NetComposites present Global Composites, an international conference and exhibi...
13 March 2018
JEC World 2018 closed its doors on 8 March with a record increase in attendance, after welcoming more than 1,300 exhibitors and 42,445 profe...
13 March 2018
The EPSRC Future Composites Manufacturing Research Hub (The Hub) has released the programme for its one-day conference taking place alongsid...
13 March 2018
The JEC World 2018 Innovation Awards ceremony took place on 7 March, opened by a presentation by Yves Rossy, aircraft pilot and inventor of ...
13 March 2018
Composites UK will be hosting two events in April with some big-name speakers.
06 March 2018
SABIC is featuring several innovations in materials and manufacturing designed to drive broader adoption of strong, lightweight thermoplasti...
06 March 2018
At JEC World 2018, Airborne will introduce its latest innovations in automated manufacturing solutions for composites: an Automated Laminati...
06 March 2018
The EPSRC Future Composites Manufacturing Research Hub is pleased to announce that the call for abstracts for ICMAC 2018 has now been extend...
06 March 2018
Michelman is addressing the need for automotive lightweighting with its newest portfolio of film formers, Hydrosize Link.
06 March 2018
Mass Reduction for Mass Production: High Volume Manufacturing of CFRP, a paper co-presented by Felix Diebold, Development Lightweight Design...
06 March 2018
Cygnet Texkimp will unveil its high-tolerance reverse roll coating machine at JEC World, inviting manufacturers in the high-end prepreg mark...
06 March 2018
At JEC World, Cevotec will announce a partnership with Composite Automation to introduce its composite additive manufacturing technology to ...
06 March 2018
Mikrosam will present its latest AFP/ATL robotic solutions – TAURUS, LIBRA AND DISCOVERY – at JEC World.
06 March 2018
On 3 May 2018 at WMG, Warwick, Composites UK will be hosting a marketing seminar for those in the composites sector looking to develop their...
06 March 2018
Ashland is introducing a new Derakane resin at JEC World 2018. Derakane Signia resins are built on the same backbone as the legacy Derakane lines, but bring added features and benefits.
06 March 2018
Evonik Industries will introduce its new ROHACRYL acrylic-based structural foam core material technology at JEC World.
06 March 2018
LEHVOSS North America will showcase three new thermoplastic compounds at NPE 2018, 7-11 May in Orlando, Florida, US. A major focus of the exhibit will be on the company’s customised material solutions and its expanding capabilities in custom compounding, additive manufacturing, masterbatch and concentrates.
06 March 2018
Zoltek will be showcasing a special display on the new Uniti electric car at JEC World.
06 March 2018
Biteam reports that it has developed the first integrated I-beam with a tapering angle of about 6°. The carbon fibre tapered I-beam will be displayed at JEC Show 2018.
27 February 2018
On 6 March, JEC Group will open the doors of JEC World, the trade show that brings together all the composite industry stakeholders, from ma...
27 February 2018
3A Composites will introduce its latest innovations in sustainable core materials at this year's JEC World.
27 February 2018
Aliancys will be present several new products, including Daron 8150 resin for high performance SMC, Neomould 2017-S-01 tooling resin for the...
27 February 2018
Altair will present its comprehensive technology and expertise for the design, optimisation and simulation of composite structures and mater...
27 February 2018
Applied Graphene Materials will demonstrate Structural Ink, a technology that enables the selective targeting of performance gains by printing graphene into composite structures where it will be most design and cost efficient.
27 February 2018
Armacell will present its ArmaShape technology for the large-scale production of 3D-shaped PET foam core materials.
27 February 2018
BYK will premiere BYK-C 8013, a solvent-free, polymeric coupling agent for improving the mechanical strength of carbon fibre reinforced, rad...
27 February 2018
CGTech will demonstrate how advanced programming strategies and simulation can lead to better composites parts.
27 February 2018
Chomarat is launching a new glass multiaxial non-crimp fabric (NCF) for thermoplastic composites at JEC World.
27 February 2018
Cobra International will celebrate its 40th year anniversary at JEC World.
27 February 2018
Composites Evolution is pleased to announce the launch of its new prepregging business from 1st March 2018 following a major investment in new prepreg manufacturing facility.
27 February 2018
Composite Integration is launching its new range of Ciject 3 injection equipment.
27 February 2018
Coventive Composites has recently expanded its pilot-scale manufacturing facilities to include hot-melt prep...
27 February 2018
Diab is highlighting its contribution to two projects that have been nominated for this year’s JEC Innovation Awards.
27 February 2018
Dieffenbacher will present its new solutions for the high-volume production of fibre reinforced plastic comp...
27 February 2018
The European Composites Industry Association will be offering demonstrations of its Eco Impact Calculator on...
27 February 2018
Exel Composites will highlight composite innovations designed to enable the next generation of smart, sustainable construction solutions at JEC World 2018.
27 February 2018
Graphenano Composites will present pultruded profiles incorporating graphene during JEC World.
27 February 2018
Haydale will be demonstrating real-life applications of its lightweight graphene enhanced prepregs at JEC Wo...
27 February 2018
Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind...
27 February 2018
Heraeus Noblelight, has collaborated with Compositadour, Coriolis and Hexcel, to apply their breakthrough composites heating technology – humm3 – to the manufacture of a full-scale aerospace demonstrator panel from dry fibre material.
27 February 2018
Huntsman Advanced Materials will be highlighting its portfolio of composite, adhesive and syntactic solution...
27 February 2018
IntAir will refine the materials and upscale the manufacturing process for a new generation of aircraft interior composites that are cheaper, lighter and safer than the toxic, carcinogenic materials that are currently used.
27 February 2018
At JEC World, KraussMaffei will present cost-efficient solutions for manufacturing fibre reinforced plastic components, focusing on new proc...
27 February 2018
METYX is bringing artistic flair in composites to JEC World with a glass fibre sculpture by the contemporary Turkish artist, Bülent Sancar, ...
27 February 2018
For the first time, Michelman will showcase its expanding portfolio of fibre sizing solutions with its own booth at JEC World 2018.
27 February 2018
Porcher Industries’ five business units will present new market specific technical textile and thermoplastic...
27 February 2018
RAMPF Tooling Solutions, RAMPF Composite Solutions and US subsidiary RAMPF Group Inc will exhibit at this ye...
27 February 2018
R-Tech Materials is showcasing its composite testing capabilities at this year’s JEC World.
27 February 2018
Scott Bader will launch two new brands at JEC World – Crestafire and Crestafix – and give two technical pres...
27 February 2018
At JEC World Sicomin will highlight its new engineering services and showcase a variety of key product ranges including bio, clear, fire ret...
27 February 2018
Sigmatex will showcase its range of high-performance carbon fibre textiles at JEC World, and introduce its d...
27 February 2018
Solvay will showcase its composite and speciality polymers material technologies through leading-edge applications.
27 February 2018
Spheretex will launch its latest product development Sphere.core PSI, a core material for making light and s...
27 February 2018
Celebrating a century of innovative development since its founding in 1918, Teijin will present several of its composite and material solutions.
27 February 2018
TenCate Advanced Composites will highlight its latest developments in composite material technologies for aerospace and high performance industrial markets.
27 February 2018
Technical Fibre Products (TFP) will focus on the capability of its Optiveil nonwovens to deliver an exceptio...
27 February 2018
Tri-Mack Plastics Manufacturing is sharing the results of a recently completed test that demonstrates the bo...
27 February 2018
Wabash MPI and Carver will highlight their full line of hydraulic and pneumatic presses for the composites i...
27 February 2018
Williams Advanced Engineering will present its lightweight electric vehicle (EV) platform, which demonstrate...
20 February 2018
Global Composites, a new international conference jointly hosted by NetComposites and the American Composites Manufacturers Association (ACM...
20 February 2018
The latest version of VERICUT machine simulation, verification and optimisation software, V8.1, will be featured on CGTech’s stand at the MA...
06 February 2018
CompIC ME, a leading Middle East construction industry conference dedicated to the use of composite materials within construction, will see ...
06 February 2018
R-Tech Materials is teaming up with Zwick Roell to run an introductory training course on mechanical testing of composites.
30 January 2018
The 5th biennial Composites Innovation will take place on 20th - 21st June 2018 at the Nottingham Conference Centre, Nottingham, UK, with pa...
30 January 2018
JEC Group has announced the 30 finalists in the 10 categories of its 2018 JEC Innovation Awards.
30 January 2018
The American Composites Manufacturers Association (ACMA) has announced the programme for its first Composites Recycling Conference, which takes place on 10-12 April in Knoxville, Tennessee, US.
23 January 2018
Composites UK reports an unprecedented number of early bookings for its 2018 Industry Awards Dinner.
23 January 2018
The German Federation of Reinforced Plastics (AVK) is inviting applications for the AVK Innovation Award 2018 in fibre reinforced plastics/composites.
09 January 2018
Composites in Sport 2018 will return to Holywell Park Conference Centre at Loughborough University, UK, on 3rd and 4th...
09 January 2018
CAMX 2017 – The Composites and Advanced Materials Expo, produced by the American Composites Manufacturers Association (ACMA) and the Society...
02 January 2018
NetComposites Enterprise, in association with the American Composites Manufacturers Association (AMCA), is pleased to announce the programme...
19 December 2017
CompIC ME, a leading Middle East construction industry conference dedicated to the use of composite materials within construction, will see ...
19 December 2017
The American Composites Manufacturers Association (ACMA) has announced the winners of its Awards for Composites Excellence (ACE).
19 December 2017
CAMX – The Composites and Advanced Materials Expo has announced the winners of the fourth annual CAMX Award.
19 December 2017
CAMX – The Composites and Advanced Materials Expo has announced the CAMX 2017 Technical Paper Award and Poster Session winners.
12 December 2017
OCSiAl’s Nanoaugmented Materials Industry Summit gathered together around 400 industry players from 30 countries to learn more about produci...
12 December 2017
Huntsman’s Advanced Materials and Polyurethanes divisions will highlight composite resin systems and adhesives that help manufacturers build stronger, lighter weight composite parts at CAMX 2017, 12-14 December in Orlando, Florida, US.
05 December 2017
Mikrosam will introduce its new hybrid automated fibre placement (AFP) and filament winding solution for production of structural composite ...
05 December 2017
Chomarat will present two new applications using its C-PLY carbon multiaxial fabric – a drone wing and a kayak – at the CAMX 2017 exhibition...
05 December 2017
JEC Group has announced the jury for the second edition of its Start-up Booster competition to be held during JEC World 2018 on 6-8 March 2018.
28 November 2017
NetComposites is pleased to announce the programme for the next edition of CompIC ME (Composites in Construction Middle East), an internatio...
28 November 2017
ADEKA and GH Craft claim they have developed the world’s first fibre-to-composite (FtoC) moulding process to laminate fibre reinforced plastics (FRP) in open moulds.
28 November 2017
The EPSRC Future Composites Manufacturing Research Hub has formed a strategic partnership with ICMAC 2018: the International Conference on Manufacturing of Advanced Composites.
21 November 2017
A record attendance 15% higher than last year was achieved at the Advanced Engineering 2017, held in Birmingham, UK, on 1-2 November, accord...
21 November 2017
When participating in the Composites UK North West Regional Roadshow in September, Safran Nacelles says it made several connections with the...
14 November 2017
More than 230 exhibiting companies from Asia, Europe and America were represented at the 10th JEC Asia exhibition in Seoul last m...
14 November 2017
Scigrip will present a range of structural, methacrylate adhesives (MMAs) designed to offer strength, robustness and ease of use for boat an...
07 November 2017
NetComposites is delighted to announce that Scott Bader Middle East Limited, part of the multinational chemicals company, will be the major ...
07 November 2017
During JEC Asia 2017 Innovation Awards, the JEC Group named OCSiAl's Tuball Matrix single wall carbon nanotube-based pre-dispersed concentra...
07 November 2017
On 1 November Composites UK revealed the winners of its 2017 Composites Industry Awards at a dinner held at the National Motorcycle Museum, Birmingham.
07 November 2017
Industry trade association Composites UK has named Tom Rockwood as Apprentice of the Year at its annual awards dinner on 1 November.
31 October 2017
Advanced Engineering 2017 takes place on 1-2 November at the NEC, Birmingham. Some of the industry’s biggest names, including Airbus, Hexcel...
31 October 2017
Sharp & Tappin will launch of a new composite plate saw at this year’s Advanced Engineering show.
31 October 2017
The American Composites Manufacturers Association (ACMA) is soliciting abstracts for its first-ever recycling conference, taking place on 10-12 April 2018 in Knoxville, Tennessee, US.
31 October 2017
At JEC Asia 2017 Chomarat, with partners Cobra and NeilPryde, will receive a JEC Innovation Award in the Sports & Leisure category for its C-PLY Hexagonal fabric with visual and structural stitching.
24 October 2017
Advanced Engineering 2017 has announced the show floor features that will be on display during the two-day exhibition and conference on 1-2 ...
24 October 2017
Attwater Group and its subsidiary Custom Composites will showcase a range of innovations at Advanced Engineering 2017, including carbon fibr...
24 October 2017
The British Textile Machinery Association (BTMA) is the gateway to the UK’s textile manufacturing resources and expertise for composites man...
24 October 2017
Burgmann Packings Composites is launching its new robot handling system for over-braiding a wide range of mandrels and cores.
24 October 2017
CGTech will demonstrate the new version of the VERICUT CNC machine simulation and optimisation software.
24 October 2017
Coventive Composites will be making its debut at Advanced Engineering 2017, where it will highlight several recent material developments tog...
24 October 2017
The EPSRC Future Composites Manufacturing Research Hub (The Hub) will be exhibiting and speaking at Advanced Engineering 2017.
24 October 2017
Distributor John Burn will showcase a range of its most popular advanced composite materials at Advanced Engineering 2017, including Burnco ...
24 October 2017
With an installed production capacity of 25,000 t/year, Italian company Marte has developed unsaturated polyester resins for a wide variety ...
24 October 2017
Machining and kit cutting specialist MSA Manufacturing will exhibit at Advanced Engineering 2017.
24 October 2017
NetComposites will once again be a key partner to the Advanced Engineering Exhibition which takes place at the NEC, Birmingham, UK, on the 1...
24 October 2017
OB2B Industrial Marketing & PR provides marketing and PR writing services to manufacturers of polymer based materials, composites, engineering plastics and adhesives.
24 October 2017
Oxford Advanced Surfaces (OAS) is introducing a new adhesion promotion surface treatment that can be cured using UV light.
24 October 2017
Advanced composites manufacturer Pentaxia will be unveiling plans for a £1 million investment in a new six-acre site.
24 October 2017
Precision Laser Processing (PLP) is exhibiting at Advanced Engineering 2017. The company has just invested in a £500,000 5-axis water jet cutting machine.
24 October 2017
R-TECH Materials, a UK testing, analysis and consultancy business, is showcasing its capabilities at Advanced Engineering 2017. The company's UKAS accredited laboratories run tests on all types of engineering materials, from composites and polymers to metals and ceramics.
24 October 2017
SCIGRIP will be showcasing its range of methacrylate (MMA) adhesives targeted at the automotive assembly market.
24 October 2017
Visitors to Advanced Engineering 2017 can see a Caterham Seven CSR-260 sports car with a carbon fibre reinforced plastic (CFRP) roof moulded...
24 October 2017
Senior engineering figures Stephen Ball, Roger Atkins, Kieron Salter and Rob Lewis have been confirmed as guest speakers as part of Silverstone Technology Cluster (STC)'s sponsorship of the VIP Lounge at Advanced Engineering 2017.
24 October 2017
Spolchemie reports that EnviPOXY, a drop-in bioplastic material, is an epoxy resin whose input is waste glycerine from biodiesel production,...
24 October 2017
Trident Foams will showcase 3A Composites' latest innovations in PET foam and balsa wood sustainable core materials at Advanced Engineering ...
17 October 2017
CGTech will showcase its software applications for the aerospace industry at the Dubai Airshow on 12-16 November.
17 October 2017
Fibermaq will participate for the first time in the Congress of Industrial Management and Aeronautical Technology (Cimatech), which takes pl...
17 October 2017
The 10th edition of JEC Asia, taking place on 1-3 November in Seoul, Republic of Korea, will feature conferences especially designed for the Asian composites markets.
10 October 2017
JEC Group is returning to Knoxville, Tennessee, US, for the second year in a row for JEC Automotive Forums, an international conference focusing on the use of composite materials in the automotive industry.
26 September 2017
This year’s Composites Europe trade fair held on 19-21 September in Stuttgart, Germany, attracted a total of 406 exhibitors from 28 countrie...
19 September 2017
Industrial Nanocomposite Conference (INC) organisers are pleased to welcome the support of The Graphene Council for INC 2017 being held in S...
19 September 2017
Composites Europe will be inviting designers, engineers, technicians, converters and buyers from the composites industry, as well as the app...
19 September 2017
Following its postponement due to Hurricane Irma, CAMX will now be held on 12-14 December 2017 at the Orange County Convention Centre in Orlando, Florida, US.
12 September 2017
Due to the forecasted impact of Hurricane Irma, CAMX – The Composites and Advanced Materials Expo, will not be held this week as planned.
05 September 2017
Composites UK has secured the support of British Marine for its next sector showcase Composite Materials in Marine Applications.
05 September 2017
The fourth annual Composites and Advanced Materials Expo (CAMX) – taking place in Orlando, Florida, US, on 11-14 September – will feature the show's first xC Startup Award.
29 August 2017
The programme for the 2nd Industrial Nanocomposites Conference taking place 10-11 October in Stuttgart, Germany, is now available.
29 August 2017
Composites One and the Closed Mold Alliance, along with more than 20 industry and educational partners, will demo the latest composites proc...
22 August 2017
The fourth annual Composites and Advanced Materials Expo (CAMX), taking place in Orlando, Florida, US, on 11-14 September, will feature Innovation Park, a new Exhibit Hall attraction designed to change the way attendees experience the event.
15 August 2017
PolyGraph, a multi-partner EU project led by NetComposites in the UK, will be exhibiting at Graphene Week.
08 August 2017
The programme for the eighth biennial Advanced Composites in Construction (ACIC) has been announced for the conference that will take place ...
08 August 2017
Altair and the Centre for Automotive Research (CAR) have announced the winners of the 5th annual Altair Enlighten Award, which strives to pr...
08 August 2017
The Specialist Association Foamed Plastics and Polyurethanes (FSK), Germany, is inviting innovations from the world of polyurethanes for its...
08 August 2017
CAMX – The Composites and Advanced Materials Expo has announced the finalists for the fourth annual CAMX Award, which recognises two cutting-edge innovations that will significantly impact composites and advanced materials.
25 July 2017
The Future of Composites in Construction, co-located with Techtextil North America, attracted 3096 visitors from around the world and 550 attendees to the symposium, reports JEC Group.
18 July 2017
Papers are now invited for the 2018 Composites Innovation Conference, an international conference and exhibition taking place on 20th -21st ...
18 July 2017
During the fourth annual meeting of the Aachen Centre for Integrative Lightweight Production (AZL) Partner Network in Aachen, Germany, 130 r...
18 July 2017
The UK's Advanced Engineering 2017 trade show has announced that its Composites Engineering zone is now over 90% full with only 10 stands re...
18 July 2017
During a visit to Seoul on 12 July, JEC Group President and CEO, Frédérique Mutel, shared her analysis of trends in the composites industry with Korean press, industrialists, officials and academics.
11 July 2017
Diab’s Divinycell F40 core material has been u...
11 July 2017
The call for papers has launched for the next edition of CompIC ME (Composites in Construction Middle East), an international conference tak...
11 July 2017
The second edition of JEC's Start-up Booster competition is open for submissions.
20 June 2017
Armageddon Energy, EconCore and DuPont have created a lightweight polymer solar panel which is said to be one-third the weight of a standard...
20 June 2017
The Advanced Engineering 2017 show has published its ranking of the UK’s high value manufacturing hotspots.
13 June 2017
NetComposites and the American Composites Manufacturers Association (ACMA) are inviting presentations for the Global Composites internationa...
13 June 2017
Hexcel’s Chris Harrington will be presenting new composite technologies for the high volume manufacture of carbon fibre reinforced plastic (CFRP)/metal hybrid structures in the automotive industry at Multicomp 2017, Nottingham, UK, on 14-15 June.
30 May 2017
This November the JEC Asia exhibition will take place in Seoul for the first time, and the event will highlight composites end-user markets ...
30 May 2017
Ringier Trade Media, the publisher of Coatings and Inks China, has recognised BYK as winner of the 2017 Ringier Technology Innovation Awards...
23 May 2017
Intertronics is offering process innovation and training to its customers to enhance their productivity and ability to compete in both home ...
16 May 2017
NetComposites Enterprise, in association with the American Composites Manufacturers Association (AMCA), is pleased to announce the launch of...
16 May 2017
Brian O’Rourke, Chief Composites Engineer at Williams Grand Prix Engineering, has been confirmed as a panel member for Multicomp 2017, takin...
09 May 2017
The Engineering and Physical Sciences Research Council (EPSRC) Future Composites Manufacturing Research Hub has held a launch event in Notti...
02 May 2017
US company Abaris Training Resources and KVE Composites Group of The Netherlands have agreed a collaboration to provide composites training ...
25 April 2017
The American Composites Manufacturers Association (ACMA) is now accepting entries for the Awards for Composites Excellence (ACE), which are sponsored by Composites One. The deadline for submission is 15 May.
11 April 2017
Ecocomp 2017 will feature its inaugural Student Poster Competition. Judged by a panel of industry experts, led by Neil Calder of Engineered ...
11 April 2017
The EPSRC Future Composites Manufacturing Hub will be hosting an Open Day on the 4 May 2017 at the East Midlands Conference Centre, Nottingham, UK.
28 March 2017
A new ASTM International standard will help test ‘sandwich’ panels, which are flat, lightweight, durable products often used in the cabin floors and other areas of airplanes.
28 March 2017
Key influencers in the UK architecture and construction media industry have voiced their support for Materials 2017 – the new conference and exhibition coming to London, UK, next month on the 25-26 April.
21 March 2017
JEC WORLD 2017 closed its doors on Thursday 16 March 2017 with a 2-digit attendance growth (+10%).
21 March 2017
ALMACO, the Latin American Composite Materials Association, has announced its action plan for 2017, where, in addition to the traditional co...
21 March 2017
Additive manufacturing, biomaterials and disruptive technology on Pre-Preg are the 3 innovations presented by these 3 winners from France, I...
21 March 2017
Composites UK has launched a series of regional SME roadshow events for 2017 in partnership with the National Composites Centre (NCC).
14 March 2017
Tecnatom Group, together with its French subsidiary M2M, will showcase its technological developments for the aerospace industry, especially...
14 March 2017
Solvay will launch its new innovative thermoset prepreg resin system SolvaLite 730 specifically developed for high volume automotive applications at JEC World 2017.
14 March 2017
Haydale Composite Solutions are producing a graphene-enhanced electrically-conductive carbon fibre-reinforced composite materials with improved resistance to damage from a severe lightning-strike event.
14 March 2017
The Teijin Group will showcase a wide range of high-performance composite products at JEC World 2017.
14 March 2017
JETCAM launches CrossTrack MTL, its composite material and kit location/life tracking software which is available on a monthly subscription basis and companies can also receive an initial free three-month trial without commitment.
07 March 2017
Porcher Industries will implement a multi-million Euro growth and restructuring phase as the company moves into 2017.
07 March 2017
ELG Carbon Fibre says it is taking a prominent role in a project to develop a novel composite bogie frame for use in rail vehicles.
07 March 2017
SCIGRIP is reporting a strong and impressive start to 2017 following a number of successful trials in boat yards across Europe, the company has secured a significant number of high volume orders with leading sail, power and leisure boat manufacturers.
07 March 2017
JEC World will take place from 14th - 16th March in Halls 5a and 6 of Paris Nord Villepinte Exhibition Centre, France, for 3 days of Network...
07 March 2017
3A Composites AIREXBALTEKBANOVA will showcase its new products, AIREX T10.60 and BALTEK VBC QX based on PET foam and balsa composite materia...
07 March 2017
Alan Harper Composites has launched MAGLOC, a new composite mould air ejector comprising of just two hardened precision steel parts locked t...
07 March 2017
Altair will present its comprehensive technology and expertise to design, analyse, and optimise composite material structural parts and asse...
07 March 2017
Anaglyph is demonstrating the ‘revolutionary’ hand-layup ply placement technology PlyMatch.
07 March 2017
A. Schulman will present its range of Engineered Composites and Powders for Thermoplastic Composites at JEC World 2017.
07 March 2017
Diab will be showcasing its latest product innovations and engineering capabilities for a number of applications including marine, aerospace, transport and wind energy.
07 March 2017
Covestro will present material solutions and technologies for the automotive, electronics and construction sectors and for the generation of...
07 March 2017
Bond-Laminates will be making hybrid moulding plus IMD (In-Mould Decoration) technology at JEC World 2017.
07 March 2017
CGTech will demonstrate how critical simulation is when trimming composite parts and also demonstrate VERICUT Composite Applications: VERICU...
07 March 2017
CHOMARAT G-FLOW, a reinforcement that combines structural and vacuum-draw functionalities, and is being used by leading companies in the mar...
07 March 2017
Covestro will present material solutions and technologies for the automotive, electronics and construction sectors and for the generation of...
07 March 2017
CRP Technology will showcase its latest innovations in the field of additive manufacturing with Windform high performance materials.
07 March 2017
Diab will be showcasing its latest product innovations and engineering capabilities for a number of applications including marine, aerospace, transport and wind energy.
07 March 2017
Dow Automotive will present its latest innovation in composite solutions, VORAFUSE epoxy intermediates at JEC 2017.
07 March 2017
ELG Carbon Fibre is taking a prominent role in a project to develop a novel composite bogie frame for use in rail vehicles.
07 March 2017
Evonik will showcase its endless fibre-reinforced UD tapes with thermoplastic matrices at JEC World 2017, now distributing them under the VE...
07 March 2017
Fibres Recherche Développement (FRD) will showcase its expertise in plant fibres, from the choice of reinforcement (UD, multiaxial, rovings,...
07 March 2017
Granta Design will present its latest software technology, solutions for managing composite data, support for composite simulation, and tools to aid the qualification and specification of composites, at JEC World 2017 in Paris.
07 March 2017
Hexcel will be promoting a number of composite innovations for aerospace, wind energy, automotive and recreation industries at JEC World 2017.
07 March 2017
JEC Group launches ‘Startup Booster’, a program meant to support and accompany innovations and entrepreneurship in composites (aeronautics, automotive, construction, medical, design, sports and leisure, etc.), a dynamic and growing market that is expected to reach $ 90 billion (in value) by 2020.
07 March 2017
JETCAM will exhibit version 4 of its CrossTrack Composite Manufacturing suite, including the new Material Tracking Lite (MTL) product aimed at customers who want low-cost material life tracking of rolls and kits at JEC World 2017.
07 March 2017
L&L Products has joined a top composite customer to work together on a solution to bond a rear spoiler made from carbon fibre reinforced...
07 March 2017
METYX Composites will showcase its latest high performance Eglass, aramid and carbon fibre technical textile products in its range of RTM, m...
07 March 2017
Michelman will use this year’s JEC World 2017 event in Paris, France to feature its versatile line of fibre sizings that are used by fibre p...
07 March 2017
North Thin Ply Technology (NTPT) will showcase its range of Thin Ply Prepregs, processing technologies and products for performance sports a...
07 March 2017
Airbus Helicopters and Porcher Industries will showcase the latest structural component on the H160; Airbus Helicopters’ new cutting-edge co...
07 March 2017
RAMPF Tooling Solutions will feature the newest board, paste, and liquid materials for maximising the benefits of lightweight construction u...
07 March 2017
R-TECH Materials will be showcasing its capabilities for composites at this year’s JEC World in Paris.
07 March 2017
Rubbercraft will showcase its latest capabilities to design and custom manufacture elastomeric Reusable Vacuum Bags (RVB) during JEC World i...
07 March 2017
During JEC World, SCIGRIP is participating in a series of technical demonstrations with Magnum Venus Products.
07 March 2017
SAERTEX, together with Brødrene Aa and two other partners, have won the prestigious JEC Innovation Award 2017 in the ‘Better Living’ category for the tourist ferry ‘Vision of the Fjords’, which is constructed almost completely of carbon.
07 March 2017
Scott Bader will be promoting its materials solutions for manufacturers of composite parts under a new ‘Making a Positive Difference’ corpor...
07 March 2017
Following the launch of Sicomin’s bio resin range, the company says it has firmly established itself as the leading formulator and supplier ...
07 March 2017
Technical Fibre Products (TFP) will showcase its new range of lightweight nonwovens with increased flexibility, smoothness and fibre volume ...
07 March 2017
TenCate Advanced Composites will launch its next generation of fibre reinforced composite materials for aerospace and high performance industrial applications during JEC World 201.
07 March 2017
extechno will launch its latest equipment ROVINGTEST which measures the most important properties of rovings all at once.
07 March 2017
Toho Tenax Europe (TTE) has developed a new compound, based on recycled thermoplastic carbon fibre material and PEEK (polyetheretherketone) ...
07 March 2017
Wabash MPI and Carver are exhibiting at JEC World 2017 and will highlight their full line of hydraulic and pneumatic presses for the composi...
28 February 2017
Nearly 100 composites manufacturing industry professionals will assemble in Atlanta, Georgia, US, on 4-5 April 2017, for the North American Pultrusion Conference, produced by the American Composites Manufacturers Association (ACMA) and the European Pultrusion Technology Association (EPTA).
21 February 2017
Composites UK recently organised a site visit of A C Marine & Composites (ACM&C) in Gosport, UK, giving them an insight into the com...
14 February 2017
Following on from two successful events in 2016, Dark Matter Composites and Composites UK are again teaming up to provide a seminar on risks...
14 February 2017
Prof Mark Goulthorpe, Associate Professor at the MIT Department of Architecture, teaching in undergraduate, graduate and post-graduate programs, and undergoing research in digital design and fabrication will serve as the guest keynote speaker for the Future of Composites in Construction Show & Conferences in Chicago at McCormick Convention Center, the premier convention facility in North America, Downtown Chicago, Illinois, US on 21 June 2017.
31 January 2017
The ICERP-JEC Innovation Award within the Marine segment goes to Diab/CCG and Aquarius Shipyard for innovative use of a single shot resin infusion process with stiffeners for the hull and deck or all kinds of vessels.
31 January 2017
The German Federation of Reinforced Plastics (AVK) is inviting applications for the AVK Innovation Award 2017 in fibre-reinforced plastics/composites.
31 January 2017
For its 10th anniversary, the International Conference on Bio-based Materials, 10-11 May, Cologne, Germany, has a special focus: Bio-based building blocks and platform chemicals
24 January 2017
Evonik’s newly developed PulPress method is ensuring manufacturers can mass-produce complex moulded parts at a reasonable price, taking the ...
24 January 2017
JEC World 2017 will take place from 14th - 16th March at the Paris Nord Villepinte Exhibition Centre, France, and JEC Group is proud to unveil the names of the 13 winners of the JEC Innovation Awards.
24 January 2017
A recent study by the Institute of Polymers and Composites at Hamburg University of Technology (TUHH) has compared neat and TUBALL single wall carbon nanotube modified unidirectional CFRP prepreg with results showing that ultra-low concentrations of 0.01 and 0.05 wt.%, nanotubes significantly improve fracture properties and fatigue behaviour.
24 January 2017
Kordsa has won the Jury’s Special Award in the ‘Project Contest on Energy Efficiency in Industry’ organised by the Ministry of Energy and Natural Resources, Renewable Energy Directorate General.
24 January 2017
John B. Homoelle, outgoing Director of New Technology & Regulatory Affairs at Michelman, has become the first recipient of the company’s Dr. John S. Michelman Award for Outstanding Technical Contributions.
17 January 2017
Sicomin has supplied a complete package of composite materials to produce both moulds and parts for the 5 gilded domes of the recently inaug...
17 January 2017
The panel has been announced for CompIC 2017 and will consist of Network Rail, Rijkswaterstaat, Optima Projects and Connectra Global, which ...
10 January 2017
On 31st January 2017, the Osirys Project consortium will be holding a project workshop to deliver its results to the construction industry a...
03 January 2017
Multicomp conference is set to bring together researchers, designers, manufacturers and end-users to showcase the latest developments in hyb...
03 January 2017
From 7th-9th February 2017, the American Composites Manufacturers Association (ACMA) and its members will continue to advocate for the increased use of fibre-reinforced polymer (FRP) composites in infrastructure applications.
20 December 2016
The American Composites Manufacturers Association (ACMA) and the European Pultrusion Technology Association (EPTA) announce the first ever North American Pultrusion Conference, which will take place 4-5 April 2017, at the Atlanta Marriott Marquis.
20 December 2016
The AVK – Industrievereinigung Verstärkte Kunststoffe (Federation of Reinforced Plastics) has announced the winners of its Innovation Awards 2016.
13 December 2016
Toho Tenax congratulates the carbon concrete composite researchers Prof. Manfred Curbach, Prof. Chokri Cherif and Prof. Peter Offermann from...
13 December 2016
The 9th annual edition of JEC Asia in Singapore concluded on a positive note for the Composites markets in Asia Pacific as the event counted...
13 December 2016
The University of Southern Queensland hosted the 1st International Symposium on Advanced Composites at USQ Springfield recently.
13 December 2016
On 8 December, the awards ceremony for the Composites Industry ‘Top of Mind’ competition was held in São Paulo, Brazil.
29 November 2016
NetComposites is pleased to announce the publication of the conference programme for CompIC 2017 which will set the scene for the future of ...
29 November 2016
After five years of work with a total spend of £22m, the Composites Innovation Cluster (CiC) came to a close on 17 November 2016 with a high...
29 November 2016
On 2 November 2016 at the National Conference Centre in Birmingham, Composites UK awarded Plataine with the 2016 Innovation in Composite Manufacture Award.
22 November 2016
Technical Fibre Products (TFP) will be launching its new, updated Tecnofire range of fire protection materials at Composites Europe in Dusse...
22 November 2016
Olympus-FRP Brigante Engineering Group and the Arch. Simonetta Pegorari, Communication & Marketing, Composite Materials, Tepco and CMC Composite Materials centre has launched the 2017 Carbon Fibre Design Contest with the support of Stratasys.
22 November 2016
LORD is competing for the fifth Top of Mind Award of the Composites Industry in the category ‘Adhesives’.
15 November 2016
Solvay is the materials supplier named on an SPE Automotive Innovation Awards Competition winner in the Aftermarket Category.
15 November 2016
The 9th annual JEC Asia will showcase the best current and future Composites Innovations during the 3 day event held between the 15-17 Novem...
15 November 2016
Technical Fibre Products (TFP) will be hosting a free, live Webinar titled ‘learn to enhance the performance, properties and production of c...
15 November 2016
On 2 November 2016, at the National Conference Centre in Birmingham, Composites UK announced the winners of its 2016 industry awards at its prestigious black-tie awards dinner.
08 November 2016
Meet and interact with graphene experts at the Graphene Connect workshop taking place at Messe Düsseldorf, conference room 814 A & B, du...
01 November 2016
VELOX will be present at the Advanced Engineering Show taking place on the 2-3 November at NEC in Birmingham, UK.
25 October 2016
Attwater and Custom Composites will display advanced carbon fibre marine products and a range of their best-selling laminates, when they ret...
25 October 2016
On 2-3 November, Chomarat will present its latest glass and carbon innovations at the Advanced Engineering Show in Birmingham, UK.
25 October 2016
Cristex Composite Materials will be exhibiting at the Advanced Engineering Show 2-3 November 2016, NEC, Birmingham, UK.
25 October 2016
ELG Carbon Fibre will be making its debut appearance at the Advanced Engineering Show 2016 in Birmingham, UK on the 2-3 November.
25 October 2016
epm:technology has achieved AS9100 approval industry standard quality management system (QMS) within the aerospace sector and says it has strengthened its team with the key appointment of Andrew Walker as Commercial Director.
25 October 2016
Hexcel says its HiMax carbon fibre reinforcements have been selected by Bright Lite Structures (BLS) for the manufacture of safety-critical ...
25 October 2016
In the past decade, John Burn has been a regular exhibitor at the Composites Engineering Show, part of Advanced Engineering.
25 October 2016
This year the NCC says its stand is going to be bigger and better than ever, and even made from carbon fibre.
25 October 2016
Pipex px will be exhibiting at Advanced Engineering 2016 and its Technical Director and composite solutions specialist, Simon Eves, will be one of this year’s expert guest speakers, presenting an enlightening brief on the ‘World’s First Phenolic FRP Handrail Application Offshore’.
25 October 2016
The PRF team will showcase its prepreg materials alongside its traditional hand layup range, and in particular, will be presenting its highly toughened RP549 epoxy prepreg.
25 October 2016
Scott Bader will be exhibiting its latest technology advanced materials and services for manufacturing high performance composite parts, including its Crystic Ecogel ‘ultra-low’ styrene content spray gelcoats range with four grade options for a variety of end applications including marine, transportation, buildings, general industrial and wind turbine blades.
18 October 2016
CAMX 2016 Reflects the Growth and Bright Future of the Composites & Advanced Materials Industry
18 October 2016
3A Composites AirexBaltekBanova was awarded the IBEX Innovation Award 2016 in Boatbuilding Methods & Materials for its BANOVA products.
18 October 2016
The schedule for Composites One, the Closed Mold Alliance and Magnum Venus Products 2017 educational workshops that run in association with the Institute for Advanced Composites Manufacturing Innovation (IACMI) has been released.
11 October 2016
The Fire Retardant Additives (FRA) business unit at Huber Engineered Materials has introduced two new technologies.
04 October 2016
CAMX, The Composites and Advanced Materials Expo, announced the CAMX 2016 Technical Paper Award and Poster Session winners during the expo, ...
27 September 2016
Olympic canoeist, Tim Baillie, will provide the keynote at Composites in Sport 2016, taking place on 16 November at Holywell Park Conference...
27 September 2016
AkzoNobel launches an innovative e-learning safety training module at the Composites and Advanced Materials Expo (CAMX) in Anaheim, Californ...
27 September 2016
Composites UK has revealed its shortlist for the 2016 composites industry awards.
20 September 2016
The American Composites Manufacturers Association (ACMA) has announced the finalists for the Awards for Composites Excellence (ACE), sponsor...
20 September 2016
Composites One, along with the Closed Mould Alliance and more than 20 industry partners, will present more than 15 closed mould and advanced...
20 September 2016
Technical Fibre Products (TFP) will be exhibiting several innovative nonwoven developments at CAMX from 27-29 September 2016 in Anaheim, Cal...
20 September 2016
Chomarat will present its latest innovations at CAMX 2016, including a carbon C-PLYT backpack frame created in partnership with Rocket Compo...
20 September 2016
Wabash and Carver are highlighting their standard and custom composite moulding presses for manufacturing and laboratory applications, with ...
20 September 2016
A newly renamed Scott Bader North America (SBNA) is exhibiting at CAMX 2016 from 27-29 September 2016, in Anaheim, California, US, in Booth S46.
20 September 2016
Solvay has received the 2016 Society of Plastics Engineers (SPE) Process Innovation Award for the ‘Most Innovative Composite Part’.
06 September 2016
The eighth biennial Advanced Composites in Construction (ACIC) conference will be taking place on 5-7 September 2017, at the University of S...
06 September 2016
EU Funded project, NCC-Foam, is presenting a demonstrator at SMM, the leading international maritime trade fair, in Hamburg, Germany, taking place 6th - 9th September.
06 September 2016
Luminati Aerospace CEO Daniel Preston, Architect Greg Lynn, and Local Motors General Manager Gregory Haye highlight the first ever CAMX General Session panel.
06 September 2016
Michelman is introducing two unique polyurethane dispersions designed as fibre sizing for reinforced composites in automotive under-the-hood applications.
23 August 2016
A spectacular aerobatic aircraft, which passed airworthiness tests at the University of Sheffield Advanced Manufacturing Research Centre wit...
09 August 2016
Papers are requested for NetComposites’ first ever Multicomp Conference, which will take place on 21-22 June 2017, at the Nottingham Confere...
12 July 2016
Abstracts are now being taken for CompIC, an international conference focussing on composites in construction, which will take place 31 Janu...
05 July 2016
Composites Innovation 2016, which focused on the latest advances in automation, was a huge success attracting people from across the globe.
28 June 2016
Boeing will celebrate its 100th anniversary at the Farnborough International Airshow, displaying advanced commercial and defense platforms, and presenting a unique exhibit to commemorate its first century and look ahead to the future.
21 June 2016
For the 9th consecutive year, the JEC Asia International Composites event will settle in at the Suntec Center in Singapore for another three-day event on 15-17 November 2016.
31 May 2016
For the 9th consecutive year, the JEC Asia International Composites event will take place at the Suntec Center in Suntec City, Singapore, fo...
31 May 2016
Dr. Lawrence T. Drzal, University distinguished professor of Chemical Engineering and Director-Composite Materials and Structures Center at Michigan State University's College of Engineering, has been named the 2016 Lifetime Achievement Award winner by the Automotive Division of the Society of Plastics Engineers (SPE).
17 May 2016
NetComposites is pleased to announce Andrew Mafeld of Connectra Global as its keynote speaker at Composites Innovation 2016, taking place on...
19 April 2016
JEC Americas International Composites Event will bring together trailblazers and innovators in composites at the fifth annual international conference and exhibit show in Atlanta, US from 3-5 May 2016.
29 March 2016
The Composites Innovation 2016 conference programme has been released featuring speakers from Altair, Plataine, Coriolis, Exel Composites, Flow International, Mafic and Sandvik.
01 March 2016
JEC World will take place from 8th – 10th March 2016, in a 62,000 sqm exhibit space within Paris Nord Villepinte Exhib...
23 February 2016
The 5th biennial Composites Innovation Conference will take place on 22-23 June 2016 at the Mercure St Paul’s Hotel, Sheffield, UK, focusing on latest advancements in automation.
02 February 2016
Diab will participate in CompIC (Composites in Construction) Middle East Conference, which will take place at Hilton Dubai Jumeirah Resort in Dubai, UAE, 9-10 February 2016.
05 January 2016
The new fibre composite and lightweight construction trade fair ‘Experience Composites – powered by JEC’ will take place in Augsburg, Germany, between 21-23 September 2016, for the first time.
22 December 2015
JEC Group and the Society of Plastics Engineers (SPE) have finished two days of conferences and business networking on the use of composite materials in racing bicycles and on applying technology transfer to the design of consumer bicycles.
15 December 2015
JEC Group has recently become a Consortium Member of the Institute for Advanced Composites Manufacturing Innovation (IACMI - The Composites Institute).
15 December 2015
Organised by CGTech, TTL and Siemens, the ‘Essentials for Excellence in Aerospace Manufacturing’ conference was held at the Manufacturing Technology Centre (MTC), Coventry, UK, on 26 November 2015.
08 December 2015
NTPT will demonstrate how Thin Ply Prepreg Technology can help bicycle designers develop lighter, stronger and faster frames at Cyclitech 20...
01 December 2015
JEC is locating its Paris, France, exhibition to a bigger venue with a new name: JEC World.
17 November 2015
The UK’s largest annual trade show and open conference for the high performance engineering sectors closed its doors to record numbers of visitors this November.
17 November 2015
350 people participated in the International Composites Seminar last week in São Paulo, Brazil; an event organised by the Latin American Com...
17 November 2015
Strongwell Corporation has been awarded the American Composites Manufacturers Association’s (ACMA) ACE Award in the Infinite Possibility for...
17 November 2015
Composites UK, the Trade Association for the UK composites industry, welcomed 250 attendees to its Awards Dinner on 4 November 2015, a repor...
17 November 2015
At this year’s Composites UK Industry Awards annual dinner, the ‘Innovation in Design’ award was won by Far-UK for its super lightweight car...
17 November 2015
Approximately 200 people participated in the the Brazilian Composites Industry Top of Mind award ceremony, held on 5 November 2015 at Transamérica Expo Center, in São Paulo, Brazil.
17 November 2015
Over 100 people from almost 60 of the UK’s leading technology manufacturing companies attended CGTech’s latest VUE 2015 (VERICUT Users Exchange), held on 29 September 2015, at Williams F1, Oxfordshire, UK.
17 November 2015
The Automotive Division of the Society of Plastics Engineers (SPE) have announced the category and Grand Award winners for its 45th-annual Automotive Innovation Awards Competition, the oldest and largest recognition event in the automotive and plastics industries.
10 November 2015
NetComposites presents Composites Innovation 2016, an international conference and exhibition taking place 22-23 June 2016 at the Advanced M...
10 November 2015
JEC Group is going a step further in its mission to address every industry using Composites Materials by focusing a brand new conference on ...
03 November 2015
EPSRC CIMComp will present new developments in textile and 3D reinforcements including quad-axial braiding, tufting with multifunctional threads, and Augmented Reality (AR) training tools at the Composites Engineering show at The NEC, Birmingham, UK.
03 November 2015
Co-located with Techtextil North America and Texprocess Americas, the JEC Americas Composites Show & Conferences will be host to 750 exhibitors and 9,000 attendees encompassing 363,000 square feet of the Georgia World Congress Center on 3-5 May 2016.
03 November 2015
The Composites and Advanced Materials Expo (CAMX) presented two awards, sponsored by Ashland, honouring cutting-edge innovations that will s...
03 November 2015
JETCAM Composite roll out new versions of its core composite software products, as well as showcasing the latest in laser projection systems which offer solutions for kitting, automatic ply verification and documentation, and FOD prevention at Airtec in Munich, Germany, Hall C3 Booth B15 between 3-5 November 2015.
03 November 2015
The Lightweighting Excellence Programme (LX) will be launched at Advanced Engineering UK 2015 and it will announce three UK-based automotive...
03 November 2015
Automotive firms from the West Midlands’ six Local Enterprise Partnerships (LEPs) will take part in a delegation to showcase the region’s services and cutting-edge technology to the wider engineering market.
27 October 2015
Advanced Engineering UK returns to Birmingham’s NEC on 4-5 November 2015.
27 October 2015
NetComposites will be running one of its Live Online Training modules, ‘Introduction to Composites’ during the Advanced Engineering Show 2015 taking place on 4 – 5th November at The NEC, Birmingham, UK.
27 October 2015
At the upcoming Advanced Engineering Show, Composites Evolution will be launching its new range of aligned Biotex Flax tapes, offering signi...
27 October 2015
North Thin Ply Technology (NTPT) will be showcasing its lightweight prepreg and automation solutions for the marine, motorsports, industrial...
27 October 2015
CGTech will demonstrate the new version of VERICUT CNC machine simulation and optimisation software at Advanced Engineering 2015 on the 4-15 November 2015.
27 October 2015
Sigma Components will showcase its Sigma Lite range at the Advanced Engineering show including its ‘star of the show’ COMPipe – a composite aero-engine pipe that delivers weight savings of 50% over traditionally-manufactured pipes.
27 October 2015
Scott & Fyfe will introduce several new products to its growing range of standard and innovative reinforcement materials for the composite industry at Advanced Engineering UK, which is to be held in The NEC, Birmingham, UK on the 4-5 November 2015.
27 October 2015
Technical Fibre Products (TFP) will be exhibiting its advanced nonwovens at the Composites Engineering Show, part of the Advanced Engineering UK group of events which will be held at The NEC, Birmingham, UK from 4-5 November 2015.
27 October 2015
Attwater Group is once again exhibiting at the Advanced Engineering Show when it returns for the sixth consecutive year in November.
27 October 2015
Formax will be showcasing a selection of their optimised multiaxial fabrics for the automotive, aerospace, marine, sports and industrial markets Advanced Engineering Show 2015 taking place on 4 – 5th November at The NEC, Birmingham, UK.
27 October 2015
VELOX will present its wide portfolio of composites specialities including epoxy resins, reinforcements such as natural fibres, pre-pregs, carbon fibre, as well as tooling materials, core materials and release agents Advanced Engineering Show 2015 taking place on 4 – 5th November at The NEC, Birmingham, UK.
27 October 2015
Sicomin will present infusion processing solutions that best assist manufacturers within the marine sector, aerospace and sports and leisure markets at CAMX 2015.
27 October 2015
IDI Composites International has partnered with Horton to produce a high-strength composite fan blade that excels at engine cooling in harsh environments.
27 October 2015
Vectorply is excited to announce the release of VectorLam Cirrus 2.0 at the Composites and Advanced Materials Expo (CAMX) on 26-29 October 2015 at the Dallas Convention Center in Dallas, Texas, US.
27 October 2015
Cytec Industries will be presenting information on its end to end composite portfolio, including structural and tooling prepregs, resin infusion systems and structural adhesives that are complemented by a range of process materials available as roll stock or tailored kits.
27 October 2015
Composites One, along with the Closed Mold Alliance and Magnum Venus Products, has partnered with the Institute for Advanced Composites Manufacturing Innovation (IACMI) to lead four schools in 2016 focused on advanced process and materials.
27 October 2015
Covestro will showcase its advanced polyurethane systems for composites and examples of its customer collaborations during Composites and Advanced Materials Expo (CAMX).
27 October 2015
The University Of Sheffield Advanced Manufacturing Research Centre (AMRC), along with Boeing, is to have work shown at the British Design Mu...
13 October 2015
More than 700 leading international suppliers have booked stands for Advanced Engineering UK, which opens its doors on 4th - 5th November 20...
13 October 2015
At CAMX 2015, Scott Bader is promoting its latest advanced composite materials and applications, including the carbon fibre compatible high ...
13 October 2015
On 16 October, DIAB has the chance to win the award for the Most Sustainable Company in 2014 at the Golden Evening Gala in Laholm, Sweden.
06 October 2015
Experience Composites, co-organised by the JEC Group will be held in Augsburg, Germany from 21-23 September 2016 in a multi-location format.
06 October 2015
A full schedule of the conference program for the second annual Composites and Advanced Materials Expo (CAMX), taking place in Dallas, US, 26-29 October 2015, is now available online.
06 October 2015
Composites One, along with the Closed Mold Alliance and more than 20 industry partners, will present closed moulding and advanced process de...
06 October 2015
The 4th session of JEC Forums gathered major Industry leaders around 2 days of high-level conferences discussing Efficiency in Design & Production for Aeronautics & Automotive.
29 September 2015
Students will have the opportunity to showcase their work to an industrial audience in a poster competition that will run during INC 2015 (Industrial Nanocomposites Conference) in Stuttgart, Germany, 24-25th November.
29 September 2015
ROHACELL went to the podium twice during the AVK Federation of Reinforced Plastics Innovation Award Ceremony at the Composites Germany Confe...
29 September 2015
JEC Asia will host 3 renowned motivational Keynote speakers over the 3 days of the event, taking place in Singapore from the 20th to 22nd October, designed to illustrate human development, team spirit and winning methods.
29 September 2015
RTP Company will feature successful applications created from its portfolio of industry-leading engineered thermoplastic compounds at the up...
22 September 2015
RTP has developed new RTP 100 eXtra Performance (XP) Compounds, a series of thermoplastic compounds formulated for higher strength, modulus and impact properties than any standard chopped fibreglass polypropylene (PP) compounds available on the market today.
22 September 2015
PRET Composites announce the new name of its US operating unit, Wellman Advanced Materials, after acquiring WPR Holdings (Wellman Plastics Recycling) of Johnsonville, South Carolina, US, earlier this year.
15 September 2015
Composites Evolution will be presenting “Hybrid Carbon-Biocomposite Automotive Structures with Reduced Weight, Cost, NVH and Environmental I...
15 September 2015
Automated Dynamics’ composite production and laser-based fibre placement technology has been chosen by NASA for continued research and development.
08 September 2015
Dr. Jacob Anderson, Senior Research and Development Engineer at PPG Industries, has been named a winner of the Dr. Jackie Rehkopf Best Paper Award for the Society of Plastics Engineers 15th annual SPE Automotive Composites Conference & Exhibition (ACCE).
08 September 2015
3D Printing Engineering is exhibiting for the first time at the TCT Show 2015 (stand H46F), NEC, Birmingham from 30 September – 1 October, where it is launching its new design, 3D colour modelling, tooling and rapid manufacturing services utilising 3D Systems 3D printing technology.
01 September 2015
JEC Group has revealed the results of the JEC Asia Innovation Awards competition that highlights innovative companies and processes among all stakeholders.
18 August 2015
Following the successful completion of a 3 year qualification program of subsea flowline for hydrocarbon service, Petronas has requested Airborne Oil & Gas supply a TCP Flowline for a pilot project, intended to be installed later this year.
11 August 2015
RTP has acquired Polymer Partners, a manufacturer of black concentrates and speciality compounds located in Henderson, Kentucky, US.
28 July 2015
There are 17 nominations for Altair’s 2015 Enlighten Award with the winner to be announced at the CAR Management Briefing Seminars in August.
21 July 2015
The kick-off event for a new AVK working group dedicated to "Continuous Fibre-Reinforced Thermoplastics in the Automobile Sector" took place in Frankfurt, Germany, on 1 July, 2015.
23 June 2015
BGF Industries has launched its latest innovation in thermoplastic composite material, PolyPreg.
09 June 2015
AMI Consulting has just published a new report on the latest developments in the polymer distribution market in Europe.
02 June 2015
Solvay has launched Tegralite, a family of materials which offer the aeronautics industry new downstream solutions and part making capabilities that improve fuel efficiency and speed up the production, refurbishment and maintenance of planes at a lower cost.
26 May 2015
Engineered Sheet Products (ESP), a division of RTP Company, has developed a unique thermoplastic sheet with anti-static properties inherent ...
26 May 2015
Solvay Specialty Polymers has introduced Veradel 3300 SL 30 polyethersulfone (PESU) to help automotive OEMs increase powertrain efficiency and cut CO2 emissions.
19 May 2015
Solvay is proudly taking a leadership role in the development of the Polimotor 2 all-plastic automotive engine to be tested in a race car next year, demonstrating the company’s unique and industry-leading advanced specialty polymer technologies in light-weighting through metal replacement.
19 May 2015
Two grades from Scott Bader’s range of Crestabond primer-less methacrylate structural adhesives have now been independently approved by DNV-...
05 May 2015
EPL Composite Solutions has developed an in-house testing facility to measure and demonstrate the durability of a new generation of graphene...
05 May 2015
Victrex has successfully commissioned the first production stream of its £90 million third polyaryletherketone (PAEK) manufacturing plant as...
28 April 2015
NetComposites will host the second of its series of live online training modules titled, “Polymer Matrices for Composites”, on Wednesday, 29...
28 April 2015
Composites market newcomer, Katcon Advanced Materials and German Engineering specialist M.TEC have formed a strategic cooperation in order to establish a high-class product portfolio to serve automotive and aircraft interior customers, thanks to help from the Aachen Centre for integrative Lightweight Production (AZL).
21 April 2015
In its mission to spot and promote the most advanced composite innovations, JEC Group has revealed the 11 winners of JEC Innovation Awards.
21 April 2015
Growing demand for lightweight composites in North America and Europe has prompted Hanwha Azdel to increase capacity for its Azdel SuperLite lightweight reinforced thermoplastic (LWRT) composite product at its Virginia, US, production facility.
21 April 2015
The National Sanitation Foundation (NSF) has certified seven of Solvay Specialty Polymers’ Amodel polyphthalamide (PPA) and KetaSpire polyetheretherketone (PEEK) resin grades, under its NSF/ANSI 51 standard for food equipment materials.
14 April 2015
Teijin has integrated its development and marketing of automotive-use carbon fibre reinforced plastic (CFRTP), aiming to strengthen the grou...
14 April 2015
Tri-Mack Plastics believes that it has found the formula for meeting clients’ needs for lower cost, lightweight, high-quality thermoplastic ...
07 April 2015
The United States Patent and Trademark Office has issued Automated Dynamics (ADC) with US Patent 8,947,847, which covers methods to automate incorporation of lightning strike protection layers into composite structures.
31 March 2015
AGY has expanded its capacity to produce S-2 Glass yarns and rovings.
31 March 2015
Radel PPSU’s superior chemical resistance, transparency and compatibility with ultrasonic welding make it the material of choice for demandi...
17 March 2015
The expanded material modelling platform software from Digimat’s e-Xstream software enables design engineers to simulate fibre-reinforced composite parts more accurately adding thirteen of Solvays advanced polymer grades.
03 March 2015
NetComposites, in collaboration with Tilsatec and FORMAX, has developed an innovative, highly aligned flax-based tape and non-crimp fabric.
03 March 2015
L&L Products will showcase its F610 reformable epoxy adhesive film, the A-K series of ambient curing structural adhesives and the A-J se...
03 March 2015
Technical Fibre Products (TFP) will be exhibiting their advanced nonwoven materials and new products including an extended range of thermopl...
24 February 2015
NetComposites has developed injection mouldable long fibre thermoplastic (LFT) Flax/PP and Jute/PP pellets.
17 February 2015
Greene, Tweed has commissioned additional state-of-the art composites manufacturing equipment to support the ongoing growth of production pr...
03 February 2015
The Latin American Composite Materials Association (ALMACO) and JEC have entered into an agreement to promote Compocity 2015, the composites city that will be built at the Expo Transamerica, in São Paulo, Brazil, and will be open to visitors from 4 - 7 November, 2015.
20 January 2015
Lehvoss North America has developed new thermoplastic compounds that make it possible to produce gear wheels that are more resilient when co...
20 January 2015
Angstron Materials will be featured this month in a segment for Discovery Channel’s Trending Today.
20 January 2015
Citadel Plastics has opened a new manufacturing facility in Changshu, a city in the Jiangsu Province of China, as part of a joint venture with EMEI Group.
13 January 2015
RTP Company has expanded its very long fibre reinforced Polypropylene (PP VLF) portfolio to include a range of low emission products.
06 January 2015
A PhD student from the University of Bristol, UK, has designed and developed a hand-held laminating tool, known as the dibber, for use in th...
06 January 2015
Tepex performance composites from Lanxess subsidiary Bond-Laminates has been used to improve the mechanical strength of fibre-reinforced the...
04 November 2014
NetComposites will be offering its initial advice and signposting service, "Ask the Expert", for the third year running at the Composites Engineering Show 2014, taking place on 11 - 12 November at the NEC, Birmingham, UK.
19 August 2014
Registrations for the Opportunities for FRP Materials in Mass Transport Applications one-day event are now open; set to offer a unique meeti...
01 July 2014
Biocomposites are steadily gaining in importance for the future of the manufacturing sector, and Composites Europe 2014 is set to present th...
13 May 2014
NetComposites has announced a two day event which aims to showcase material and manufacturing developments in FRP’s by presenting the best q...
11 June 2013
The University of Nottingham has won the JEC Asia Innovation Award in Biocomposites for their research on natural-fibre development for smal...
06 March 2013
NetComposites will present its latest biocomposite developments at JEC Europe, Porte de Versailles, Paris, France, next week.
09 October 2015
Advanced Engineering UK will enjoy new support from SAE International for its 2015 show being held at the NEC, Birmingham, UK, on the 4th an...