NetComposites
Juniar Spraybooths
Intertronics Issues Advice on Specifying a Dispensing Robot

Intertronics Issues Advice on Specifying a Dispensing Robot

10 July 2018

Intertronics has compiled a guidance note on how to specify a dispensing robot.


CGTech Organises UK VERICUT User Exchange Events

26 June 2018

CGTech has announced three UK VERICUT User Exchange (VUE) events to take place throughout September and October.


KraussMaffei Automated Wetmoulding Process Offers Shorter Cycle Times

KraussMaffei Automated Wetmoulding Process Offers Shorter Cycle Times

12 June 2018

A new, fully automated wetmoulding system which offers shorter cycle times and increased process reliability compared with manual solutions ...


KraussMaffei Demonstrates Combination of Fiberform and Multi-Component Technology

KraussMaffei Demonstrates Combination of Fiberform and Multi-Component Technology

29 May 2018

At the NPE2018 plastics show in Orlando, US, KraussMaffei presented for the first time a FiberForm lightweight thermoplastic composite appli...


Composites Innovation 2018 Speaker Spotlight: Clive Chitiz, Plataine

Composites Innovation 2018 Speaker Spotlight: Clive Chitiz, Plataine

29 May 2018

With just a few weeks to go until Composites Innovation 2018 – Advances in Automation, NetComposites’ Communications Manager Siobhan Longhur...


Cevotec Starts Cooperation to Serve Asian Market

Cevotec Starts Cooperation to Serve Asian Market

08 May 2018

Together with an international group of companies and research institutions, German fibre patch placement specialist Cevotec has launched th...


CGTech Opens Office in Russia

08 May 2018

UK company CGTech, developer of VERICUT CNC simulation, verification and optimisation software, has announced the formation of a direct office in Russia. Headquartered in Moscow, the subsidiary is responsible for marketing, sales, technical support and reseller support throughout Russia.


Composites Innovation 2018 Speaker Spotlight: Dr Richard Collins, IDTechEx

Composites Innovation 2018 Speaker Spotlight: Dr Richard Collins, IDTechEx

01 May 2018

With just a few weeks to go until Composites Innovation 2018 – Advances in Automation, NetComposites’ Communications Manager Siobhan Longhur...


Technology Park Ypenburg Initiative Strengthens Innovation in Advanced Materials

Technology Park Ypenburg Initiative Strengthens Innovation in Advanced Materials

10 April 2018

The Technology Park Ypenburg programme has been officially launched in The Netherlands. The municipality of The Hague, four local companies ...


JETCAM Updates Core Products

JETCAM Updates Core Products

10 April 2018

JETCAM has announced new versions of its entire range of core applications, reflecting the company's continuing move into total automation a...


FARO Laser Templating Technology Increases Production Throughput

FARO Laser Templating Technology Increases Production Throughput

10 April 2018

FARO reports that its Tracer Laser Projector allows composites manufacturers to speed ply placement, shorten production cycles, and reduce d...


Ascent Expands Portfolio with Exechon Aerospace Robots

Ascent Expands Portfolio with Exechon Aerospace Robots

03 April 2018

Ascent Aerospace has added Exechon Enterprises’s parallel kinematic robots to its portfolio of manufacturing automation solutions.


CGTech Releases VERICUT Composite Applications Software Version 8.1

CGTech Releases VERICUT Composite Applications Software Version 8.1

03 April 2018

CGTech is now shipping the next major release of VERICUT Composite Applications: VERICUT Composite Programming (VCP) and VERICUT Composite S...


Composites Innovation 2018 Early Bird Rate – One Month to Go

Composites Innovation 2018 Early Bird Rate – One Month to Go

27 March 2018

Composites Innovation 2018 will be focusing on emerging technologies and new innovations in the expansion of composites manufacturing, highl...


Airborne Introduces Composite Automation Products at JEC World 2018

Airborne Introduces Composite Automation Products at JEC World 2018

06 March 2018

At JEC World 2018, Airborne will introduce its latest innovations in automated manufacturing solutions for composites: an Automated Laminati...


JEC World 2018: Cevotec Partners with Composite Automation

JEC World 2018: Cevotec Partners with Composite Automation

06 March 2018

At JEC World, Cevotec will announce a partnership with Composite Automation to introduce its composite additive manufacturing technology to ...


Mikrosam Presents AFP/ATL Robotic Solutions at JEC World 2018

Mikrosam Presents AFP/ATL Robotic Solutions at JEC World 2018

06 March 2018

Mikrosam will present its latest AFP/ATL robotic solutions – TAURUS, LIBRA AND DISCOVERY – at JEC World.


JEC World 2018: CGTech Showcases VERICUT Software

JEC World 2018: CGTech Showcases VERICUT Software

27 February 2018

CGTech will demonstrate how advanced programming strategies and simulation can lead to better composites parts.


KraussMaffei Presents Processes for Series Production at JEC World 2018

KraussMaffei Presents Processes for Series Production at JEC World 2018

27 February 2018

At JEC World, KraussMaffei will present cost-efficient solutions for manufacturing fibre reinforced plastic components, focusing on new proc...


Conbility and Fraunhofer IPT Commercialise Tape Processing Systems

Conbility and Fraunhofer IPT Commercialise Tape Processing Systems

20 February 2018

Conbility and Fraunhofer Institute for Production Technology (IPT), Aachen have started a long-term cooperation for the further development ...


Cevotec Introduces SAMBA System for Prepreg

Cevotec Introduces SAMBA System for Prepreg

20 February 2018

Cevotec has announced that a SAMBA Series Patch Placement system is now available for processing thermoset prepreg material.


CGTech Celebrates 30 Years

CGTech Celebrates 30 Years

13 February 2018

CGTech, the developer of VERICUT software, is celebrating three decades of consistent growth.


Cevotec Offers Carbon Tape for Automated Fibre Placement Processes

Cevotec Offers Carbon Tape for Automated Fibre Placement Processes

06 February 2018

Cevotec reports that cevoTape is individually manufactured and tailored to major automated fibre placement (AFP) processes, offering a new o...


Burgmann Expands Braiding Capacity

Burgmann Expands Braiding Capacity

06 February 2018

Burgmann Packings Composites has announced an expansion in braiding capacity at its plant in Dublin, Ireland.


Programme Launched for Composites Innovation 2018 Featuring Globally Renowned Experts in Automation

Programme Launched for Composites Innovation 2018 Featuring Globally Renowned Experts in Automation

30 January 2018

The 5th biennial Composites Innovation will take place on 20th - 21st June 2018 at the Nottingham Conference Centre, Nottingham, UK, with pa...


Mikrosam Introduces Integrated AFP and Filament Winding Solution at CAMX 2017

Mikrosam Introduces Integrated AFP and Filament Winding Solution at CAMX 2017

05 December 2017

Mikrosam will introduce its new hybrid automated fibre placement (AFP) and filament winding solution for production of structural composite ...


Mikrosam Expands in North America

Mikrosam Expands in North America

21 November 2017

Mikrosam is entering into partnership with US distributor Composite Automation to bring its composites machinery solutions to the North Amer...


Burgmann Introduces Robotic Over-Braiding Facility at Advanced Engineering 2017

Burgmann Introduces Robotic Over-Braiding Facility at Advanced Engineering 2017

24 October 2017

Burgmann Packings Composites is launching its new robot handling system for over-braiding a wide range of mandrels and cores.


CGTech Demonstrates VERICUT 8.1 at Advanced Engineering 2017

CGTech Demonstrates VERICUT 8.1 at Advanced Engineering 2017

24 October 2017

CGTech will demonstrate the new version of the VERICUT CNC machine simulation and optimisation software.


Daher Develops Composite Technologies for Aircraft Spar

Daher Develops Composite Technologies for Aircraft Spar

19 September 2017

Daher has designed and manufactured a composite, vacuum bag only, spar, as part of the Corac project for the composite airplane of the futur...


New TVR Employs iStream Carbon Technology

New TVR Employs iStream Carbon Technology

12 September 2017

TVR partnered with Gordon Murray Design on the design and development of its new sports car, which was launched at the Goodwood Revival on 8...


Fatra Invests In Negri Bossi Machines

Fatra Invests In Negri Bossi Machines

22 August 2017

Fatra, a supplier of injection moulded components to international companies such as Ikea, recently installed five Negri Bossi Vector machin...


North Star Imaging Introduces Robotic Loader

North Star Imaging Introduces Robotic Loader

15 August 2017

North Star Imaging (NSI)'s new robotiX technology can be added to the company's standard X-ray and CT systems, or to existing NSI systems, t...


CDI Develops CD6019 Towpreg Line

15 August 2017

Century Design (CDI) has developed the CD6019 towpreg machine to provide customers with the capability to produce towpreg in-house.


CRTC and IACMI to Develop Advanced Manufacturing Machinery

08 August 2017

Through a contract with the Institute for Advanced Composite Manufacturing Innovation (IACMI), the Composite Recycling Technology Centre (CRTC), Port Angeles, Washington, US, will pioneer ways to automate processing of carbon fibre prepreg scrap.


S&S Plastics Invests in Intelicare Dosers and Material Loaders

S&S Plastics Invests in Intelicare Dosers and Material Loaders

01 August 2017

S&S Plastics has installed Intelicare masterbatch dosing units and material loaders.


Call for Papers Announced for Composites Innovation 2018

Call for Papers Announced for Composites Innovation 2018

18 July 2017

Papers are now invited for the 2018 Composites Innovation Conference, an international conference and exhibition taking place on 20th -21st ...


Plataine Launches MAT 4.0 Digital Manufacturing Software

18 July 2017

Plataine is introducing the latest generation of its material and asset tracker software, MAT version 4.0, which is designed to help manufacturers gain full traceability of the digital thread whilst optimising material and tool utilisation, productivity, throughput and quality.


Automation-Ready Plasma Treatment Unit from Intertronics

Automation-Ready Plasma Treatment Unit from Intertronics

20 June 2017

A new automation-ready version of the Relyon Piezobrush plasma treatment unit from Intertronics – designated the PZ2-i – is engineered for u...


SABIC and Airborne Join Forces to Develop Automated Composites Processes

SABIC and Airborne Join Forces to Develop Automated Composites Processes

09 May 2017

SABIC has invested in Airborne International, joining a growth financing round by existing shareholders that will contribute to Airborne’s f...


Henkel to Further Drive Growth Within Global Aerospace Industry

Henkel to Further Drive Growth Within Global Aerospace Industry

04 April 2017

Henkel’s Adhesive Technologies business unit has started the construction of a new production facility for aerospace applications at its sit...


Nottingham to Lead New £10.3m Composite Manufacturing Research Hub

Nottingham to Lead New £10.3m Composite Manufacturing Research Hub

06 December 2016

The University of Nottingham has led the team that has secured £10.3m in government funding for new research into pioneering composite manuf...


NetComposites Announce Call for Papers for Composites Innovation Conference

NetComposites Announce Call for Papers for Composites Innovation Conference

10 November 2015

NetComposites presents Composites Innovation 2016, an international conference and exhibition taking place 22-23 June 2016 at the Advanced M...


Mikrosam Host the 2<sup>nd</sup> Bi-Annual Automation in Composites Manufacturing Seminar - ACMS 2014

Mikrosam Host the 2<sup>nd</sup> Bi-Annual Automation in Composites Manufacturing Seminar - ACMS 2014

25 November 2014

According to Mikrosam, this was the second ACMS seminar that has united over 50 professors, scientists and other professionals from the indu...


DANOBAT Composites Launches Automation Solutions for Manufacturing with Dry Material

DANOBAT Composites Launches Automation Solutions for Manufacturing with Dry Material

24 June 2014

DANOBAT is developing highly specialised solutions to automate manufacturing with dry composite material.


Web Industries Launches New Composites Automation Development Centre

16 August 2011

Web Industries (WI) has opened a new Composites Automation Development Centre in the Atlanta, Georgia area.


Carbon Fibre Gripper Systems Developed for Improved Automation

23 September 2005

SAS Automation of Ohio USA, developer of light weight Robotic-End-of-Arm-Tooling for handling plastic moulded parts, has introduced a new line of robotic gripper fingers with lighter weight carbon fibre bodies.