Composites World / NetComposites

Connecting you to the composites industry

Advertisement

NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.

On 1st January 2020, NetComposites' media assets including netcomposites.com, newsletters and conferences were transferred to Composites World (Gardner Business Media).

This site is no longer being updated. Please direct all enquiries to netcomposites@gardnerweb.com.

For further details see our joint press release.

Multi-Axial Inc. Introduces New Composite Product Line

  • Friday, 3rd September 2004
  • 0 comments
  • Reading time: about 2 minutes

More in Aerospace

Solvay’s Xencor LFT Chosen for All-polymer E-bike

  • 22nd October 2019

Sigmatex Sigma Design Showcased

  • 21st October 2019

Alvant Recognised at BEEA Awards

  • 21st October 2019

Multi-Axial, Inc. has issued details of its first two families of basic “”value-by-design”” brand advanced composite products, StructurPly and Tow Strand brands.

The StructurPly family consists of: StructurPlyI Engineered Uniaxial thermoplastic matrix resin preimpregnated, (commonly called “”prepreg””) material, StructurPlyII Engineered Multiaxial Thermoplastic Matrix Resin Prepreg, StructurPly III Engineered Uniaxial Low Binder Reinforcement Architecture (commonly called “”textile perform””), and StructurePly IV Engineered Multiaxial Low Binder Reinforcement Architecture.

StructurPly I and II are thermoplastic matrix resin prepregs that are used in the construction of primary load carrying composite structures. Unlike the typical 3 to 8 hours required by the thermoset resin materials to cure, StructurPly cures within 2 to 4 minutes at 385 F degrees and 14 psi pressure.

The StructurPly III and IV Uniaxial and Multiaxial Reinforcement Architectures are used as a precursor for the thermoset prepreg industry, the revolutionary Resin Infusion (RTM) and related processes for making complicated shapes and very large fibrous reinforced composite components and Wet Lay-Up processes that are typically used in the sporting goods and boat building industries.

The second family of “”value-by-design”” products is the TowStrand brand that consists of two basic products. They are TowStrandI Engineered Uniaxial Low Binder Selective Reinforcement and TowStrandII Engineered Uniaxial Thermoset Matrix Resin Selective Reinforcement Prepreg. These products were designed for the most economical and effective method of selective reinforcing a wide variety of structural members such as, engineered wood beams (Glulam) for building construction, sporting goods and boats to name a few.

Founded in May of 2003 and located in Huntington Beach, California, Multi-Axial has spent its first year of operation at its proof-of-concept facility performing the research and development necessary to bring its unique product line to market. Multi-Axial engineers pioneered the enabling technology and developed the machinery and manufacturing processes that created the two families of distinctive, way-of-the-future engineered non-woven binder-bonded fabrics. These products replace the outdated “”aerospace”” or conventional woven fabrics and unidirectional collimated tape products with typical thermoset matrix resins that have been in use for over forty-five years. SturcturPly products offer the advantages of being lighter, stronger, and more durable than conventional prepreg materials. They will save up to 60% of the fabrication cost for a wide variety of composite components that are utilized in every market.


For more information visit:


Share this article


Categories


More News


Comments (0)

Leave your comment