Composites World / NetComposites

Connecting you to the composites industry


NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.

On 1st January 2020, NetComposites' media assets including, newsletters and conferences were transferred to Composites World (Gardner Business Media).

This site is no longer being updated. Please direct all enquiries to

For further details see our joint press release.

Micro-Measurements Releases New CEA-Series Strain Gages

Micro-Measurements Releases New CEA-Series Strain Gages

  • Tuesday, 16th August 2016
  • Reading time: about 2 minutes

Micro-Measurements has released three CEA-Series strain gages designed to perform standard compression tests on polymer matrix composite materials.

According to Micro-Measurements, the new sensor patterns feature a unique configuration that is ideal for any strain measurement requiring close proximity to one-sided features, such as weld joints, structural discontinuities or stress risers like holes and cracks.

“Structural designers have told us that finding the compression strength of composite materials is necessary and is the subject of ASTM Standard Test Method D6641,” said Bob Watson, Director of Engineering, Micro-Measurements. “The loading device recommended for use in this standard provides a 12.7 mm (0.5 in.) test section length, and a test section width range of 12.7 – 30 mm (0.5 – 1.2 in.), making our new UB pattern geometry ideal for this testing.”

The 062UB, 125UB and 250UB patterns are designed with both solder tabs placed on one side of the linear sensing grid, which allows these foil strain sensors to be properly oriented on the composite specimen, keeping the sensing grid centred in the test zone.

Available in 350 ohm to minimise self-heating, the UB patterns are made in CEA-Series construction, which Micro-Measurements explains features a thin, flexible, cast polyimide carrier backing and encapsulation, and rugged, copper-coated solder tabs that provides quick and simple soldering. The UB patterns are also available with optional pre-attached lead wires, eliminating the chance of heat damage to the test specimen during soldering.


Image provided by Micro-Measurements

For more information visit:

Share this article

More News

Comments (0)

Leave your comment