Composites World / NetComposites

Connecting you to the composites industry


NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.

On 1st January 2020, NetComposites' media assets including, newsletters and conferences were transferred to Composites World (Gardner Business Media).

This site is no longer being updated. Please direct all enquiries to

For further details see our joint press release.

Lighter Traveling with LFI and First-class Surfaces

Lighter Traveling with LFI and First-class Surfaces

  • Tuesday, 7th June 2016
  • Reading time: about 4 minutes

High strength, dimensional stability and fit accuracy, coupled with low weight, are the hallmarks of large-format composite components produced using the Long Fibre Injection (LFI) process from KraussMaffei.

The company explains that first-class surfaces can also be achieved through a simple combination of processes – for example with the InMold primer. The Nanotechnology Center of Composites (NCC), the Russian lightweight construction research centre in Moscow, is also relying on this combination and using it to produce a tailgate module in a self-supporting composite structure for a public service bus. The reward for the company’s endeavour: the modular bus concept developed jointly by the NCC and the Evopro Group from Hungary won the 2016 JEC Innovation Award.

One important feature of the public service bus is the very large two-tone tailgate. It is 2.2 meters wide and 1.4 meters high. NCC relies on the system competence of KraussMaffei in this case. “The customer’s requirements were clearly defined. The customer asked for a substantial weight reduction and Class A surface quality together with a rigid, high-strength component. A quick colour change and, thus, a wide range of colours were also requested. All of this had to be achieved in short cycle times and with cost-optimised production,” said Wolfgang Hinz, Product and Sales Manager in the Composites/Surfaces Business Unit and the responsible Project Manager at KraussMaffei.

According to KraussMaffei, a joint decision was taken with the customer to use a combination of the Long Fibre Injection (LFI) process and the InMold primer process. This has one advantage: the surfaces prepared perfectly for individual painting are produced directly and fully automatically in the mould. The cycle times can therefore be minimised, and first-class surfaces from high gloss to matt and a wide range of colours are possible. Thanks to the use of self-releasing primers, KraussMaffei explains there is also no need for external mould separating agents. In the Daimler-stone impact test, components produced using the process perform up to 600 percent better than glass fibre-reinforced plastic (GFRP) components painted afterwards with a primer.

The system was delivered to NCC in 2015 and KraussMaffei says its LFI system has been successfully used in production since then. It features a suitable shuttle mould carrier, a barrier coat spray machine, a mixing head, a 2-component paint spray machine and an LFI prototype mould. The primer is sprayed on in the first process step and the polyurethane barrier coat in the second process step. “The RimStar Compact spray mixing head from KraussMaffei ensures constant temperature control here and therefore produces the outstanding surface quality,” said Hinz.

LFI technology is then used in the third step. The glass fibre strands from the roving and the corresponding PU components are simultaneously discharged – controlled by a robot – into the open mould in a one-step process. This causes the glass fibres and the carrier matrix to bond into a high-strength composite. Since there is no need to cut and preshape fibre mats, no additional costs are incurred. “By comparison with the Sheet Mould Compounding (SMC) process or the Dicyclopentadien (DCPD) process which were also discussed by the customer, the LFI process offers considerable cost savings,” added Hinz.

In terms of component weight, the LFI process scores better than SMC with a low density of up to 55 percent. Other advantages of the LFI process are the high fibre volume content of up to 50 percent, which ensures high strength, and the high degree of flexibility in choosing fibre lengths. This permits a wide range of component designs, for example of ribs or function integration.

In the last step, KraussMaffei adds that compression moulding takes place without material flow and there is a reaction in the closed mould. The finished components are then removed and are now ready immediately for additional clear coating or final individual coating. Intermediate treatment or additional pretreatment is no longer necessary.

The system solution developed by KraussMaffei for NCC is also designed for other InMould coating processes of KraussMaffei. For example for InMould painting in which the final paint is discharged into the open mould in the first step. The spray system can consist of one or two components. “Thanks to this wide range of processes, we offer our customers maximum flexibility in the choice of colours and surfaces. These processes are simple and cost-optimised,” concluded Hinz.


Image provided by KraussMaffei

For more information visit:

Share this article


More News

Comments (0)

Leave your comment