Composites World / NetComposites

Connecting you to the composites industry

Advertisement

NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.

On 1st January 2020, NetComposites' media assets including netcomposites.com, newsletters and conferences were transferred to Composites World (Gardner Business Media).

This site is no longer being updated. Please direct all enquiries to netcomposites@gardnerweb.com.

For further details see our joint press release.

Intertronics Offer Technical Guide to Light Cure Conformal Coatings

Intertronics Offer Technical Guide to Light Cure Conformal Coatings

  • Tuesday, 18th August 2015
  • 0 comments
  • Reading time: about 2 minutes

Intertronics are offering a technical guide to light cure PCB conformal coatings, authored by Dymax.

According to Intertronics, these coatings provide superior protective performance with the added benefit of UV/light cure for quick, convenient processing and cost saving.

The guide is designed to enable customers to better understand the production savings possible from light curing. It discusses the choice of coating, based on the end-use environment, industry and customer specifications, and printed circuit board topography and potential shadowed areas. Covering developments in the technology which eliminate historic problems of shadowed areas by incorporating a secondary cure using environmental moisture at ambient temperature, thus assuring a complete cure without further heat or light energy, Intertronics claims this combination of light and moisture reactions may enable coating applications not presently considered for light cure materials, with the consequent cost and quality benefits.

The guide covers an introduction to the technology with FAQs, and a review of the benefits of light-cure conformal coatings. It then leads through selection criteria and process design, dispensing set up and curing, with information on inspection followed by rework and removal techniques with application notes for these coatings which are UL listed, IPCC-830 approved, MIL-I-46058C listed and ISO 10993 tested. The Guide to Light-Cure Conformal Coatings may be downloaded from Intertronics.

Photo provided by Interonics.


For more information visit:


Share this article


Categories


More News


Comments (0)

Leave your comment