Composites World / NetComposites

Connecting you to the composites industry

Advertisement

NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.

On 1st January 2020, NetComposites' media assets including netcomposites.com, newsletters and conferences were transferred to Composites World (Gardner Business Media).

This site is no longer being updated. Please direct all enquiries to netcomposites@gardnerweb.com.

For further details see our joint press release.

Humm3 for the First Aerospace-Scale Demonstrator Panel in Dry Fibre Composites

  • Tuesday, 27th February 2018
  • 0 comments
  • Reading time: about 2 minutes

Heraeus Noblelight, has collaborated with Compositadour, Coriolis and Hexcel, to apply their breakthrough composites heating technology – humm3 – to the manufacture of a full-scale aerospace demonstrator panel from dry fibre material.

The geometrically complex dry fibre preform was created at Compositadour’s research centre using the humm3 heating technology mounted to its Coriolis robot-based Automated Fibre Placement machine, which was configured to lay up 8 quarter-inch tows of Hexcel’s HiTape dry carbon fibre reinforcements. The preform was then infused with Hexcel’s HexFlow RTM6 resin using standard techniques at Compositadour. At an approximate size of 1.5 metres by 1.3 metres, and with 16 plies in total, the part represents a full-size aerospace panel.

It is claimed that the humm3 has proved itself to be an excellent heating technology for fast and controllable dry fibre lay-up. Speeds of up to 1 metre per second are achieved using this pulsed, broadband source of heat energy. The combination of high average power, fast control and small physical volume enables a wide range of complex geometries to be fabricated. As a diffuse, broadband source of energy, the humm3 is also safe to use (no laser safety enclosure is required) and is easily scaled to different heated widths, from less than 1 inch up to 12 inches and beyond.

Heraeus Noblelight and its project partners are proud to be exhibiting this demonstrator part at the JEC Paris trade show, from 6th to 8th March 2018. The part will be on view in the Aero Planet (Hall 6, Booth P86).

Visit Heraeus in Hall 6, Stand S7 at JEC World 2018.


For more information visit:


Share this article


Categories


Related News


Comments (0)

Leave your comment