Composites World / NetComposites

Connecting you to the composites industry

Advertisement

NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.

On 1st January 2020, NetComposites' media assets including netcomposites.com, newsletters and conferences were transferred to Composites World (Gardner Business Media).

This site is no longer being updated. Please direct all enquiries to netcomposites@gardnerweb.com.

For further details see our joint press release.

GKN Aerospace Develops Processes for Complex Composite Structures

  • Sunday, 23rd July 2006
  • 0 comments
  • Reading time: about 3 minutes

More in Aerospace

Alvant Recognised at BEEA Awards

  • 21st October 2019

Greene Tweed Launches Fusion 665

  • 16th October 2019

Evonik Adds to the TROGAMID(r) Product Group

  • 15th October 2019

GKN Aerospace is working on the development of new techniques for composite manufacture that will extend the use of composite materials across the airframe and into aero-engines.

Phil Grainger, Technical Director and Chief Technologist at GKN Aerospace explained: ”Composite manufacturing techniques are now mature and have achieved their maximum performance levels. These techniques are intensively manual, and require high levels of manpower at every stage throughout the manufacturing process. However for the composite market to grow, the cost competitiveness of the product must be improved.”

GKN Aerospace is developing new manufacturing techniques which will reduce traditional capital investment in plant whilst automating the process to maximise manufacturing performance and drive costs down. These new techniques include developing an ‘out of autoclave’ manufacturing process and introducing a high speed, highly accurate Automated Tape Layer (ATL).

Grainger continued: “We have recently delivered the first all-composite wing spar for the Airbus A400M military airlifter. These 20m long spars represent the first ever application of carbon composites for a primary structure on a large transport aircraft wing and we are producing them using much of the new manufacturing expertise we have developed”.

The new GKN Aerospace process is Resin Film Infusion (RFI) and is now being used in conjunction with self heated tooling on the A380 wing trailing edge manufacture. RFI has been shown to offer a 10% reduction in manufacturing costs, reduced tooling requirements, lower capital investment costs, lower risk in manufacture, potential weight savings as well as a consistently high quality result.

According to GKN, Automated Tape Laying (ATL) machines are showing demonstrable improvements in product quality and consistency particularly in the lay up very large and highly complex components. They also produce substantial reductions in the time required to lay up a composite stack. Typically this can be reduced from a 6 day process to a 48 hour activity, bringing significant cost benefits. ATL is to be employed in the full scale production of the A400M spars.

GKN Aerospace last year opened its Composite Research Centre, which is already involved in at least 5 aerospace related research programmes and is investigating areas including acoustic technologies, the application of composites into aero-engines and the further development of manufacturing processes which will enable large, highly complex, and curved assemblies to be produced swiftly, to high levels of tolerance, with great consistency.

Grainger concluded “Our goal is to do all this at a cost that is acceptable to the highly competitive aerospace marketplace today”. The image shows the GKN and Airbus team examining the first composite piece to be manufactured for the A380 wing.


For more information visit:


Share this article


Categories


More News


Comments (0)

Leave your comment