Composites World / NetComposites

Connecting you to the composites industry


NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.

On 1st January 2020, NetComposites' media assets including, newsletters and conferences were transferred to Composites World (Gardner Business Media).

This site is no longer being updated. Please direct all enquiries to

For further details see our joint press release.

Explosion Proof Cabinets Simplify Deployment of Field Instrumentation in Process Plants

Explosion Proof Cabinets Simplify Deployment of Field Instrumentation in Process Plants

  • Tuesday, 29th March 2016
  • Reading time: about 4 minutes

Intertec has launched a new range of explosion proof cabinets to protect field instrumentation operating in hazardous areas.

According to Intertec, the cabinets are available in a diverse range of standard sizes, as well as in custom shapes up to walk-in shelter size, and are certified for use in Zone 1 and Zone 2 hazardous areas. They are ideal for housing forward-placed analyser equipment in industrial process facilities such as petrochemical/oil refineries and fertiliser production/storage plants, and also provide the possibility to install non-Ex rated analysers and instrumentation inside Zone 1 or 2 classified environments.

Intertec adds that its pressurised explosion proof (Ex p) cabinets are constructed from GRP (glass reinforced polyester) composite materials. These materials are highly resistant to corrosion and have a similar strength to stainless steel, but are about 75 percent lighter, making them ideal for equipment containment and personnel shelter applications. They are especially suitable when robustness and rigidity need to be combined with low mass – such as on offshore platforms. They are also ideal for areas where there is a need to mitigate injury to personnel or damage to equipment, such as on sites where there is risk of an explosion.

As GRP composite materials also have a much higher thermal resistance than metal, the construction of cabinets is simplified and provides excellent insulation, greatly reducing the energy required to heat or cool the equipment. It also makes it easier to build cabinets without any thermally conductive links between their exterior and interior surfaces, thereby avoiding creating cold-spots which can lead to problems with condensation.

Intertec explains that it is capable of producing single-piece panels of GRP composite as large as 6 x 12 metres, enabling it to create cabinets of virtually any size. The panels can be chemically bonded to create very tight sealing that prevents the ingress of hazardous gas and reduces the consumption of air, which is used to create the slight positive over-pressure needed for Ex p protection. Any requirement for special air locks to allow unfettered access to equipment inside the cabinet or shelter can be accommodated very easily.

The pressurised cabinets are equipped with a control unit that regulates the flow of inert purging gas or compressed air, and then monitors the pressure inside the cabinet to ensure that it is maintained slightly above atmospheric pressure by automatically compensating for any leakage losses. Intertec works with a number of controls manufacturers to equip its Ex p cabinets with the most appropriate type of purging and pressurisation systems.

Each partially equipped enclosure is then tested by Intertec at one of its manufacturing plants, before being delivered to the system integrator for installation of the analyser instrumentation. Final safety testing of the complete unit is carried out at the integrator’s facility, prior to its installation at the customer’s site. Intertec is certified by various competent bodies – including PTB (Physikalisch-Technische Bundesanstalt) – to perform the necessary compliance testing.

According to Klaus Dieter Meyer of Intertec, “There is a growing need for Ex p field protection cabinets and enclosures in the process sector. Analysers are getting smaller and plant operators are keen to site these as close to the process as possible, in order to shorten sample lines and thereby improve the accuracy and speed of results processing. Our ability to create Ex p cabinets and enclosures of virtually any design and complexity provides system integrators with a very flexible and cost-effective solution.”


Image provided by Intertec

For more information visit:

Share this article

More News

Comments (0)

Leave your comment