Composites World / NetComposites

Connecting you to the composites industry

Advertisement

NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.

On 1st January 2020, NetComposites' media assets including netcomposites.com, newsletters and conferences were transferred to Composites World (Gardner Business Media).

This site is no longer being updated. Please direct all enquiries to netcomposites@gardnerweb.com.

For further details see our joint press release.

Covestro Receives DNV GL Certification for a Polyurethane Infusion Resin

  • Tuesday, 5th April 2016
  • 0 comments
  • Reading time: about 2 minutes

Covestro has developed an innovative technology for manufacturing wind turbine rotor blades.

According to Covestro, the rotor blades are fabricated in a special process from a polyurethane resin and a glass fibre fabric. The company has now received the important DNV GL certification for the resin.

Covestro explains that DNV GL is a leading international industry standard for the safety, reliability and performance of wind turbines. Covestro claims that its system is the world’s first polyurethane resin to receive this certification. For the company, it also is an important milestone in the advancement of renewable energies, particularly wind power.

“This brings us a big step closer to our goal of increasing the efficiency of wind power generation,” says Kim Klausen, Global Head of Covestro’s wind energy program. The resin was developed in a close cooperation between the Covestro Wind Competence Center in Denmark and the Polyurethane Research Center in Leverkusen, Germany. It has a major influence on stability and durability, the two critical properties of rotor blades. “After epoxy resins mainly were used in the industry in the past, the time has come to establish the high performance and cost advantages of polyurethane in wind power generation,” says Klausen.

Covestro says that it successfully tested the polyurethane resin on an industrial scale together with SAERTEX and HÜBERS. A prototype of a 45-meter-long spar cap recently was fabricated at the German Aerospace Center (DLR) in Stade. See the video report at https://www.youtube.com/watch?v=aICshNiCs80. The spar cap is a key component of the rotor structure that has to bear the full force of the wind.

 


For more information visit:


Share this article


More News


Comments (0)

Leave your comment