NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.
On 1st January 2020, NetComposites' media assets including netcomposites.com, newsletters and conferences were transferred to Composites World (Gardner Business Media).
This site is no longer being updated. Please direct all enquiries to email@example.com.
For further details see our joint press release.
The Development Agency for Lightweighting Baden-Württemberg is presenting its latest innovation as its ThinKing for February 2017.
Leichtbau BW presents this title each month to provide a free promotion platform to innovative products and services in lightweighting sector of the German Federal State of Baden-Wuerttemberg.
Loading and unloading of transport vehicles can often cost valuable minutes – and of course time is money. With traffic jams becoming commonplace and the traffic in inner cities more crowded new concepts are needed to ensure rapid delivery times. The German startup CIKONI says it is making a contribution towards this goal with its lightweight shelves, which are featured in the new Vision Van by Mercedes-Benz Vans. The shelves combine high-tech materials with bionic design.
Mercedes-Benz Vans presented a revolutionary transporter concept study for urban areas in 2016 with the Vision Van. According to Mercedes-Benz, the van integrates a number of innovative technologies for the final end-point deliveries of products – even using on-board drones for the final stretch of the delivery. The manufacturer itself states that it is setting new standards for performance requirements and solutions for future generations of delivery vans.
CIKONI explains that the centrepiece of the vehicle is the intelligent cargo space management, providing assistance both in loading at the logistics centre as well as in making the final delivery of packages to the recipients more efficient. The so called one-shot loading helps save the operator time and money during the loading procedure.
The lightweight shelf system developed by CIKONI is designed to be placed into the cargo area after being fully loaded. At the point of delivery, the packages are automatically removed by machines and handed over to a courier or to a delivery drone for the final delivery. This process reduces delivery time as well as the time required for the vehicle to be parked. All in all, the throughput of the vehicle can be significantly increased.
CIKONI says that the shelf itself is made of an intelligent material mix of carbon fibre reinforced plastic (CRP), aluminum and sandwich design concepts. This design guarantees high stability under hard braking conditions and sharp curves while at the same time keeping weight low. The designers took advantage of the attributes of the different materials. Weaknesses of the individual materials can be targeted and eliminated by combining different materials. Integrated support points for the load bearing elements using integrated functional surfaces minimise wear from friction and shock absorbers protect the shelves while reducing the need for additional components.
CIKONI goes on to explain that the shelves are expected to fulfill several difficult requirements. They must be designed to make the most out of the van’s cargo space while at the same time keeping weight to a minimum and maintaining stability under a load of up to 500 kilograms each while the vehicle is in motion. The racks must also be easy to handle to meet the robust requirements of the logistics industry. A bold new design was also requested in order to fit visually with the futuristic look of the Vision Van. Despite all these difficult requirements, CIKONI says its shelves were designed and built in an extremely short time.
The design of the shelves was based on a bionic principle inspired by the structure of a tree. Topology optimisation and computer aided optimisation (CAO) were used intensively to finalise the design. The shelves were then crafted using the bionic design out of an aluminum hybrid blend and numerically optimised by utilising the degrees of freedom of the fibre reinforced construction. The completed structure is extremely anisotropic, integrating material only where it is needed to bear specific loads.
The construction of the shelves was carried out in close collaboration with established companies such as UBC and Hermann Blechtechnik, both from the same region. The manufacturing process depends on adaptable development methods and rapid concept turnaround. Dr. Farbod Nezami, Managing Director of CIKONI, commented on the project noting, “Everyone involved was open for innovative developments and that is not always a given.”
Thanks to the use of high-tech materials, CIKONI says it was able to make optimal use of the available cargo space. Both volume and weight have a direct influence on the efficiency of the system. According to CIKONI, it was able to use its expertise in the area of multi-material lightweight construction throughout all stages of the process from conception, numerical optimisation and function validation to detailed construction, FE calculation and the final delivery of the installation ready rack and loading system.
In order to cover all of these bases, CIKONI had to build up a wealth of know-how. According to Nezami, “We have highly specialised development engineers who supervise the entire process from conceptualisation to simulation, construction and manufacturing processes for small and large scale serial production. This know-how is coupled with creativity and clear customer focus. Our primary goal is always to spark excitement – with our customers and the customers of our customers.”
Image provided by Leichtbau BW
For more information visit: