Composites World / NetComposites

Connecting you to the composites industry


NetComposites Ltd has transferred the rights and ownership of this website to Gardner Business Media Inc.

On 1st January 2020, NetComposites' media assets including, newsletters and conferences were transferred to Composites World (Gardner Business Media).

This site is no longer being updated. Please direct all enquiries to

For further details see our joint press release.

C-Ply Set to be Key Material in Jean-Marie Finot’s Latest Yacht

C-Ply Set to be Key Material in Jean-Marie Finot’s Latest Yacht

  • Tuesday, 18th November 2014
  • Reading time: about 3 minutes

Chomarats C-Ply is set to be a key material in Jean-Marie Finot’s Latest Yacht, The Albatros.

Chomarat explains that both the hull and the deck of the boat will be made from C-Ply, its range of carbon multiaxial reinforcements. It says, the aim of the Albatros is to give everyone the opportunity to enjoy the feeling of the surf and the joy of sailing. Because C-Ply is both light and strong, it helps to make the Albatros a boat that is fast, sturdy and easy to handle. Thanks to its composite reinforcements, Chomarat says the boat’s hull weighs just 28kg and the deck a mere 22kg, with parts that are between 2 and 6 mm thick.

According to Chomarat, the fibre angles and ply weights of the C-Ply structure, which totally respects fibre alignment, make it the perfect material for this lightweight, efficient and cost effective solution. “The combination of different C-Ply reinforcements in a monolithic laminate has a sandwich structure effect that enables a 25 to 30% increase in rigidity compared with the classic reinforcement stack (0/90),” says Jean-Marie Finot, Founder and CEO of Finot group.

By layering multiaxials in a monolithic structure and aligning fibres parallel to the length of the boat, the boat’s rigidity can be significantly improved, enabling it to withstand flexion. The pressure of the waves is supported by the boat’s shell, comprised of all the vertical structures that make up the exterior part of the boat’s hull. This shell must have bend resistance from one longitudinal section to the other, from one rail to the other.

“In other specific structures with even more demanding characteristics (parts subjected to forces along a specific vector, visible automobile parts or those subject to impact loading in aeronautics), C-Ply can be used by removing fibres placed on the perpendicular of the main effort axis and/or by using extremely thin basic plys (50gsm). This means we can develop totally innovative multiaxial materials,” says Philippe Sanial, Group R&D Director at Chomarat.

Chomarat claims that C-Ply enables parts to be mass produced because it can be manipulated without risk during the RTM stage and because it is a drapable material that can be moulded around the component. “We chose these carbons because they are compatible with Vinylester resin, a material with the best resistance to corrosion and water absorption that is usually used with fibre glass. These carbons also enable parts to be mass produced using the innovative RTM process we developed for large-scale parts. The Albatros is the only boat currently manufactured using this process,” says Jean-Marie Finot.

“We chose Chomarat because they offered the best solution in terms of technical performance and cost effectiveness. The Group has always played an active role in the French yachting market. It is a market that requires high levels of responsiveness and creativity, both of which we have always found among Chomarat staff,” he concludes.

Photo provided by Chomarat

For more information visit:

Share this article


More News

Comments (0)

Leave your comment