NetComposites
Attwater

Mikrosam Showcases Advancements for Thermoplastics at JEC World 2019

14 March 2019

Mikrosam Showcases Advancements for Thermoplastics at JEC World 2019

At this year’s JEC World 2019 Show, Mikrosam is showcasing many advancements in fabrication of thermoplastics composite parts.

One such highlight will be an automated process for fabrication of thermoplastics composites without the use of any moulds or tools.  A result of a research cooperation project between Mikrosam, General Atomics Aeronautical Systems (GA-ASI, San Diego, California, US) and Composite Automation LLC, has turned the idea of tool-less in-situ consolidation for thermoplastics into reality.

Mikrosam used its advanced systems for fibre placement (AFP) and tape layup (ATL) to create integrated manufacturing cell with dual robots working in tandem: one robot lays up thermoplastic UD tape, another robot acts as a tool opposite the placement head. The movements of the robots are precise and coordinated to obtain spatial 3D in-situ consolidation across multiple layers. The integration is made possible using Mikrosam's advanced simulation, control, and automation software MikroPlace and MikroAutomate which allows for multiple robots working as a single cell to produce a composite part.

With this integration, Mikrosam overcame many technical challenges to produce 3D composite parts – flat, spherical and bathtub shapes – without additional need for an autoclave. The material placed in space can be held together by a metal frame on one or both ends, depending on the desired final shape. This application of thermoplastic carbon fibre 3D printing presents future opportunities in composites manufacturing in industries where building a new mandrel or tool isn't always feasible, or requires flexibility, such as aerospace, space, marine, etc.  

The success of this multi-robot 3D printing system – a patent-pending innovation – leverages Mikrosam's advances in producing in-situ consolidated thermoplastic parts over the last several years. The AFP and ATL systems from Mikrosam include not only a laser heating source with precise temperature and angle control, but also a closed-loop feedback with thermal models based on testing numerous materials and shapes. Working together with several Tier 1 aerospace suppliers, Mikrosam's equipment has produced many thermoplastic parts with better mechanical properties based on this fine control of the layup parameters.

The Dual-Robot cell from Mikrosam performing a tool-less layup of thermoplastics

Mikrosam says it offers one of the most cost-competitive proven AFP solutions on the market with many advancements for maximum productivity. Featuring a multi-material AFP head capable of uni- and bi-directional placement on open 3D shapes and closed mandrel surfaces, such as pipes and vessels. The time-consuming process of switching material and technology to another on a single AFP head is now reduced to minutes: via simple spool change, and replacement of the laser with IR heating source. The automatic head exchange system allows customers to invest in new AFP/ATL heads in the future for use on the same equipment.

Visit Mikrosam in Hall 6, Stand D51 at JEC World 2019.


Photo provided by Mikrosam




Share this story


Related / You might like...

GreenLight Project to Present Its Results at the Ecocomp 2019 Conference

Environmental awareness has stimulated an increased interest in sustainable materials and issues such as recyclability and environmental responsibility are becoming ever more important.

JEC World Reinforces Its Leadership as the Foremost Event of the Composite Materials Industry

JEC World 2019 closed successfully on Thursday, 14 March, after three intense days of innovation, networking and knowledge sharing.

CRP USA Speaker at AMUG 2019 with Successful Use of AM in Aerospace Mission

CRP USA will be attending Additive Manufacturing Users Group (AMUG) as speaker. The 31st edition of AMUG will be held from 31 March to 4 April 2019, at the Hilton Chicago, in Chicago, Illinois, US.