Fagor Arrasate’s Ultra-fast Consolidator Machine System Receives the JEC Innovation Award

14 March 2019

Fagor Arrasate’s Ultra-fast Consolidator Machine System Receives the JEC Innovation Award

Fagor Arrasate's commitment to innovation has received recognition from the JEC, the leading international composites fair.

A project led by AZL Aachen, the international benchmark research centre for lightweight materials, in which Fagor Arrasate contributes as an associated partner, has won the JEC Innovation Awards, which recognise the best composite solutions, in the category of Industry and Equipment.

The project aimed at the manufacture of an ultra-fast machine (up to 500 kg/hour for the prototype) for the mass production of individual customised preforms, based on a part flow approach in combination with the placement of unidirectional tapes (in dry fibre, thermoplastic, prepreg...) by laser-assisted in situ consolidation.

The main benefits of this machine are its high production rate (>500 kg/hour) and low cycle time (<5 seconds). In addition, it is characterised by its energy efficiency, flexibility and fastness due to the use of in-situ consolidation. Besides, it is suitable for flexible production system with piece-flow principle, enabling new business models such as stiffening structures for injection and compression moulding.

This new ultra-fast consolidator machine offers both high flexibility and mass production. Fully-consolidated multilayer laminates with different fibre directions and minimise waste (tailored blanks) can be produced in cycle times under 5 seconds for the first time, whereas the most recent machines need several minutes. This is accomplished by a new piece-flow principle which is state of the art in the printing industry but has not been used in composite production.

The production principle is based on moving carrier plates (for the transportation of the laminates), which are moved by a conveyor system and fed through several applicator stations. Each applicator station is equipped with innovative narrow applicator cassettes for laser-assisted tape placement with on-the-fly cut-and-add. The applicator cassettes are 50 mm wide and can process a tape width of 25 mm. Larger tape widths are also possible as the applicator cassettes are scalable.

The collaborative project involved the participation of other international partners such as Conbility (Germany), Covestro Deutschland (Germany), Engel Austria (Austria), Evonik Industries (Germany), Faurecia Composite Technologies (France), Fraunhofer IPT (Germany), Laserline (Germany), Mitsui Chemicals Europe (Germany), Mubea Carbo Tech GmbH (Austria), Philips Photonics (Germany), SSDT Shanghai Superior Die Technology. (China), Toyota Motor Europe (Belgium).

Photo provided by Fagor Arrasate

Share this story

Related / You might like...

GreenLight Project to Present Its Results at the Ecocomp 2019 Conference

Environmental awareness has stimulated an increased interest in sustainable materials and issues such as recyclability and environmental responsibility are becoming ever more important.

JEC World Reinforces Its Leadership as the Foremost Event of the Composite Materials Industry

JEC World 2019 closed successfully on Thursday, 14 March, after three intense days of innovation, networking and knowledge sharing.

CRP USA Speaker at AMUG 2019 with Successful Use of AM in Aerospace Mission

CRP USA will be attending Additive Manufacturing Users Group (AMUG) as speaker. The 31st edition of AMUG will be held from 31 March to 4 April 2019, at the Hilton Chicago, in Chicago, Illinois, US.