NetComposites
Advanced Engineering 2019

Covestro at Techtextil 2019 in Frankfurt/Main

04 April 2019

Covestro at Techtextil 2019 in Frankfurt/Main

Techtextil, the leading international trade fair for technical textiles and nonwovens, will once again open its doors in Frankfurt/Main, Germany from 14-17 May 2019.

Covestro will be presenting new and sustainable developments with INSQIN technology for aqueous textile coatings as well as a waterbased polyurethane dispersion enabling biodegradable textile coatings at Booth D22 in Hall 3.0. Visitors can also obtain information on skin-friendly coatings for medical textiles, on a new TPU fibre as well as on film solutions for smart textiles, for example.

One of the highlights this time is breathable yet waterproof outdoor clothing. It is intended to protect joggers or hikers from rain, but at the same time let sweat escape from their skin. With the INSQIN technology, textiles are coated with waterbased polyurethane (PU) dispersions without the use of solvents.

The breathable textiles impart a pleasantly comfortable feeling. This is ensured by an adhesive coating based on Impraperm DL 5310 dispersion and a top coat based on Impraperm DL 5249. Both products also give backpacks, shoes and gloves their desired functionality.

Biodegradable textile coating

When assessing the sustainability of textiles, it is becoming increasingly important to consider the entire product cycle – including the behavior at the end of its useful life. With Impranil DLN-SD, Covestro offers a waterbased PU dispersion that is biologically degradable by microorganisms at the end of the product life cycle. The initial internal tests performed on pure polymer films without additives confirm this. The raw materials enable biodegradable coatings and composite solutions, which in turn contributes to a modern recycling economy. Under the conditions of OECD Standard 301, more than half of the dispersion is degraded within 28 days. The percentage is significantly higher than with acrylate film formers.

The aliphatic PU dispersion Impranil DLN-SD can be used to formulate very light-resistant coatings for adhesive, intermediate and top coats. They are also suitable for other product applications, such as latex gloves and packaging.

New TPU fibre for fabrics

At Techtextil 2019, Covestro will also showcase a new fibre made from thermoplastic polyurethane (TPU). Compared to conventional polyethylene terephthalate fibres, it is characterised by an improved abrasion resistance and can be heat pressed at lower temperatures. Tear resistance and a good haptic feeling are further advantages.The fibre can be used in footwear, functional textiles, sports accessories and casual wear.

Innovative film solutions for smart textiles

The use of printed electronics is becoming increasingly important in the course of increasing digitalisation in the medical and health sector and also in leisure time. Covestro has developed a range of skin-friendly film solutions to meet the requirements for lightweight and very comfortable smart textile design. Smart textiles are an important application, for example for biomonitoring, diagnostics and drug administration.

Platilon thermoplastic polyurethane (TPU) films are used, for example, in the continuous monitoring of vital functions and exact performance measurement. A conductive ink can be safely applied to the films to achieve this. Housed inside a shoe sole, patient data can be directly recorded and evaluated in real time by electronic devices.

Sustainable textile coatings for medicine

Recently, Covestro has also been developing textile coatings for medical applications. These include surgical clothing, bed pads for hospitals, coatings for medical furniture and even bandages. At Techtextil 2019, the company will present raw materials for sustainable, water-based textile coatings with good haptics and resistance to disinfectants, as well as cohesive bandages without latex for compression therapy and secondary fixation.


Photo provided by Covestro




Share this story


Related / You might like...

Formula One Composite Technology Creates Lightweight Structures to Protect Troops

Williams Advanced Engineering is working with the UK’s Defence Science and Technology Laboratory (Dstl) and Defence and Security Accelerator (DASA) to develop innovative battlefield shelter protection for troops using Formula One-derived technology and processes created in-house at Williams to create composite 3D structures that can be deployed in theatre.

AZL and Partner Institutes Present Lightweight Processes and Equipment During AZL Open Day

On 11 April 2019, the 9 Partner Institutes of the AZL opened the doors of their machinery halls and research labs to provide an extensive and on-site insight into the research and development capacities in the field of lightweight production and composites at the RWTH Aachen Campus.

LIPEX ENGINEERING Announces Nonwoven Tissue Line Order to China

LIPEX ENGINEERING has finalised contract talks with Chinese company to deliver a Nonwoven Tissue Line for basalt fibres. Delivery of the line will be during 2019 and the start-up of the line is planned for first half of 2020.