07 March 2017
07 March 2017
METYX Composites will showcase its latest high performance Eglass, aramid and carbon fibre technical textile products in its range of RTM, multiaxial and woven fabrics, as well as promoting the expanded production capacity and kitting service for fabrics, cores and vacuum consumables now available from its factory in Hungary.
METYX Composites explains that METYCORE FS (Fire Shield) and its latest new product development, METYCOREMAX FS (Fire Shield) are both fire retardant RTM reinforcement fabrics, compatible with all major resin types. Another new product being promoted during JEC World 2017 is its new range of ‘webbed’ carbon fibre woven fabrics. These new product additions to the METYX product range combine higher mechanical performance with key processing benefits to meet the high productivity needs of manufactures in the automotive, transportation, marine, rail, wind energy and industrial markets.
According to METYX Composites, these products are aimed primarily at the rail sector; both METYCORE FS and METYCOREMAX FS are halogen free, sandwich design, stitched glass fabrics with a fire retardant core. These additions to the METYCORE range of RTM reinforcements have been developed in-house by METYX R&D team to meet the EN 45 545 fire standard, now the European ‘cross border’ rail industry standard for composites used in rolling stock. To validate the FR properties, laminates are currently tested at an EN approved independent laboratory. The testing in progress covers all the stringent fire, smoke and toxic fumes (FST) aspects of the EN 45 545 fire safety regulation. Results are expected within the first quarter of 2017.
METYCORE FS and METYCOREMAX FS will be produced at the METYX Composites plant in Istanbul, Turkey, are will be available in the same published formats as traditional METYCORE RTM glass fabrics; customised fabrics with additional glass layers, surface veils and biaxial skins are also part of the product range. Being part of the long established RTM fabrics family developed specifically for resin transfer moulding (RTM), METYX Composites explains that METYCORE FS and METYCOREMAX FS offer proven quality and processing benefits. All METYCORE fabrics have high drapability for precise dry layup. During injection, the fabrics also enable rapid resin flow throughout the mould for quality and consistency, and to optimise productivity by reducing fill times, so lowering overall production costs.
A ‘webbed’ carbon woven fabric is the other new addition to the range of carbon woven products manufactured by METYX Composites, which is being showcased for the first time at JEC World 2017. As the name suggests, this ’webbed’ fabric includes the addition of a fine layer of thermoplastic coating, which resembles a spider’s web, applied as a covering to the surface of the woven fabric. This addition stabilises the woven fabric, making it less prone to deforming, which is a critical factor for a woven fabric during layup.
METYX Composites adds that the web coating, which is uniformly applied and varied according to the fabric areal weight, ensures the stabilisation of fibres during the cutting process, which results in clean cut and fringe free fabric edges. Thanks to its elastic nature, the webbed carbon woven fabric has very good drapability, essential for complex parts. It is also thermoformable, which qualifies the fabric for preforming processes.
Over the last two years, METYX Composites says it has made major investments in its Hungarian production facilities in Kaposvar by expanding capacity and improving the services offered, with special focus on EU customers. METYX Composites Hungary now manufactures high-performance multiaxial E-glass, carbon fibre and hybrid reinforcements. Uğur Üstünel, co-director for METYX Composites explains, “We started fabric production in Hungary in 2015 and now have an installed capacity of more than 3000 tonnes. In Hungary we are producing both glass and carbon fibre fabrics. In response to our EU customers, we also invested in new equipment and skilled people so we can now provide a ‘make to order’ kitting service for fabrics and foam cores.”
In mid-2016, METYX Composites also announced expansion plans, now well underway, to double the production facilities at its main manufacturing centre in Manisa, Turkey. The expanded METYX factory will include additional new production lines for both glass and carbon fibre multiaxial fabrics, additional kit cutting machines, and new CNC routers for composite plug and mould tool making.
Visit METYX Composites in Hall 6, Stand J6 at JEC World 2017.
Photo provided by METTX
Composites UK reports that its members are supporting the new 2018-2021 Safety in Manufacturing Plastics and Composites strategy (SIMPLC).
Composites are considered hard to join and researchers have predominantly focused on mechanical joining technologies including crimping, gluing, riveting or screwing. The Composites Europe exhibition in Stuttgart, Germany, on 6-8 November will show the advantages and drawbacks of each of these processes.
The Aachen Center for Integrative Lightweight Production (AZL) and the Institute of Plastics Processing (IKV) at RWTH Aachen University are commencing a study into the use of thermoplastic tapes in injection moulded parts. Companies interested in joining the study are invited to a kick-off event during Fakuma 2018 in Friedrichshafen, Germany, on 18 October.