Advanced Engineering 2018

Aliancys and GSI Discuss Design in SMC Converting New Ideas Into Real Parts

24 January 2017

Aliancys and GSI Discuss Design in SMC Converting New Ideas Into Real Parts

SMC lightweight composite materials are being used in many applications, as they can be easily moulded into unique shapes and have a capability to be made with high dimensional accuracy.

According to Aliancys, the process of converting new design ideas into real parts and the scale-up to full commercial production can be challenging yet very exciting at the same time, as is explained by matteo cortesi and erica murello of component manufacturer GSI.

It claims that SMC brings durability, strength, beauty, and much more. Consequently, SMC is the material system of choice for making components in a broad range of applications. Aliancys explains that class A body parts in SMC are used for passenger cars, trucks and agricultural equipment. Enclosures and fixtures in SMC are key components in electrical and lighting assemblies, while increasingly the SMC technology is applied for novel end-uses like home interior components and furniture.

The SMC manufacturing process is highly suitable for making production series of 500-200,000 parts per year. Compared to alternative composite transformation processes like RTM and Hand Lay-up, it says that SMC moulding cycles are much faster, dimensional accuracy is close to metal, while part performance consistency can be more easily controlled. Compared to technologies based on steel, SMC is in most cases more cost-effective at these series sizes, and brings the additional benefit of lightweight.

“Many of the OEMs and end-customers that we are dealing with, know very well the benefits of SMC,” explains Matteo Cortesi, Group Technical Director at GSI. “They approach us with clear ideas on part design, and invite us early in the process to discuss how to scale up their designs to real-life manufacturing. We know that taking care of the details early on helps to ensure that the final production can run in a smooth manner, making parts with consistent quality and predictable shape.”

After receiving initial information on new projects from the customer, a GSI team will gather to understand full list of customer requirements. Through evaluation of 3D models and by exchanging technical data on the design, the team will discuss the practicalities of high volume manufacturing (including available technical solutions, rough process lay-out, anticipated challenges and risks).

“When a customer sends us an official request for quotation as a result, we really get into the detail,” adds Matteo Cortesi. “Based on our knowledge of materials we propose the appropriate SMC material system. We also define the investments required for tooling and process automation, and then calculate anticipated part cost based on the quality requirements of the customer, anticipated cycle times, and basic assumptions on waste and components finishing. Meanwhile we define a detailed project plan for design fine-tuning and pre-production activities, taking into account product and process design uncertainties and risks.”  

“After the customer accepts our proposal, we form a joint team that will be responsible for scale-up”, comments Erica Murello, Marketing & Communication Coordinator at GSI. “In line with key project milestones, we finalise detailed part design, order tooling and equipment, and define the full supply chain (purchasing of raw materials, parts processing and finishing, logistics, quality management procedures). Also in this phase we make prototypes with the customer and ensure critical tests are performed prior to production start.”

When completed, GSI expects to start production of the SMC components in line with customer volume planning, typically for a part life time of three to five years. OEMs and end-customer will assemble the components and make a finished product for the end-user or consumer. GSI has a great track record of manufacturing quality parts in SMC. The company is proud to serve companies like Automobili Lamborghini, Ferrari, Audi (high end passenger cars), Claas, Caterpillar (agricultural equipment), CNHi (CNH tractors and IVECO trucks) and ABB Sace (electrical).

“We would like to broaden the range of applications for these versatile materials”, explains Peter Hilzendegen, SMC BMC Market Segment Manager at Aliancys. “That is why we invite these young designers to develop new concepts in SMC and BMC for furniture and lighting. We like to bring together bright designers with experienced component manufacturers and raw material suppliers. This allows using the full expertise in the value chain for creating exciting applications.”


Photo provided by Aliancys

Share this story

Related / You might like...

Cobra International Exhibits Product Range at CAMX 2018

Cobra International will showcase a range of composite products at CAMX 2018, including carbon fibre components for the automotive, transportation, marine, water sports and luxury sectors.

Metyx Expands Warehousing Facilities in Hungary

The Metyx Hungary factory, located in Kaposvár, has recently expanded its warehousing facilities, adding an additional 3,024 m2 of enclosed storage space for composite technical fabrics, packaging and FRP tooling.

ACMA Shows Support for IMAGINE Act

The American Composites Manufacturers Association participated in a roundtable discussion about the IMAGINE Act. Known as the Innovative Materials in American Growth and Infrastructure, Newly Expanded (IMAGINE) Act, the new bill is designed to promote the increased use of innovative materials like fibre reinforced polymer (FRP) composites, as well as new manufacturing methods to accelerate the deployment and extend the life of infrastructure projects.