28 February 2017
28 February 2017
When FiberSystems was asked to construct an FRP composite drainage pipe system for the Lunda/Ames Bridge at 2nd Street and US Highway 61 in Hastings, Minnesota, US the job meant that it had to design and build custom elbows, fittings, tooling and components.
FiberSystems explains that the specifications called for 12-in.-ID FRP piping; two 8-in. elbows with non-standard angles of 18.4 degrees and 71.6 degrees; several 4-in.,threaded clean-out ports, and fittings with unique configurations. Drainage systems are used to support rapid removal of water from a bridge deck to help reduce water damage and erosion of bridge approaches. Metal is subject to salt corrosion and thermal contraction and expansion.
“FRP composite bridge drainage systems are corrosion resistant and lightweight for easy handling and quick installation,” says Tim Morton, Vice President of Operations for FiberSystems. “These unique angles and fitting configurations are not something that would be available from a commodity broker.”
According to FiberSystems filament wound 1,640 ft. of 12-in.-ID FRP pipe and 160 ft. of 8-in.-ID pipe using toughened CorBan resin and gray pigment. The piping, tailored elbows and fittings were shipped to the contractor and installed in late 2013. The bridge, which crosses the Mississippi River, features the longest free-standing arch rib in North America. To date, the composite drainage system is holding its own against the elements.
Photo provided by FiberSystems
Foster Corporation has seen its business flourish in the last few years. As a result of this growth, Foster has broken ground on a new state-of-the-art 55,780 ft2 (5,182 m2) manufacturing facility that is adjacent to its headquarters in Putnam, Connecticut, US.
CGTech has unveiled a bespoke software package which can replicate the cutting conditions that would be achieved in real-world applications.
CRP Technology collaborated with the Department of Aerospace Science and Technology of the Politecnico di Milano (PoliMi) on the construction of parts for the aeroelastic wind tunnel demonstrators for ‘Aeroelastic Flutter Suppression (AFS)’ e ‘GLAMOUR’ projects.