NetComposites
3M

Composites Evolution to Display Ecopreg Products for Mass Transport at JEC Europe 2015

03 March 2015

Composites Evolution to Display Ecopreg Products for Mass Transport at JEC Europe 2015

Composites Evolution will display a range of Ecopreg products designed for the mass transport industry at JEC Europe 2015.

Ecopreg Glass/PFA is a sustainable, fire-safe prepreg material that provides a greener alternative to conventional phenolic prepregs. Their key innovation is the use of a 100% bio-based polyfurfuryl alcohol (PFA) resin system. PFA resins have similar mechanical and fire properties to phenolics, but are water-based and are 100%-derived from waste agricultural biomass and therefore doesn’t have the associated health risks of formaldehyde (which is a toxin and known human carcinogen) and VOC emissions.

Prototypes have been manufactured, including an aircraft locker door, industrial enclosure and train cable tray, which highlight the benefits of the material in each application. Whilst offering a combination of light weight, high mechanical properties and low environmental impact, the prepreg also offers excellent fire retardant properties, which is critical in each of the above applications.

Composites Evolution currently offers Ecopreg with two particular grades of glass: a 300g/m2 7781 style woven glass fabric with 40% resin content that is typically used for aircraft interiors, including sandwich panels, and an 840g/m2 8 harness satin woven glass fabric with 40% resin content that is typically used for rail, offshore and industrial applications.

The prepregs can be consolidated by vacuum bagging, autoclave or press moulding. Ecopreg is designed for use by composite component manufacturers for parts which require stringent flame, smoke and/or toxicity performance at a higher temperature. These include:

  • Aerospace: galley furniture, trolleys, lockers, decorative panels, sandwich panels
  • Offshore/Marine: pipe covers, fire protection, bulkheads
  • Construction: interior partitioning and profiles

Composites Evolution will display the prepreg and products in Hall 7.3, stand G70.

Photo provided by Composites Evolution.






Related / You might like...

Composites Europe 2018 Highlights Contributions of Composites to Sport

Applications for composites in the sports and leisure sector will be showcased by various exhibitors at Composites Europe in Stuttgart, Germany, on 6-8 November.

Alvant Supports £28m Safran-Led Aircraft Landing Gear Project

Alvant has been appointed to work on a two-year, £28 million project titled Large Landing Gear of the Future, which aims to deliver a 30% weight reduction and assist the aerospace industry’s drive to reduce fuel consumption and carbon emissions.

3D Printed Drone Prototype Wins Red Dot 2018 Design Award

Hexadrone’s 3D printed Tundra prototype, manufactured by CRP Technology via laser sintering (LS) technology using Windform SP and Windform XT 2.0 carbon composite materials, has won the Red Dot Award 2018 in the drone category.