21 July 2015
21 July 2015
An extremely lightweight paraglider harness has been created for an extreme alpine crossing, using Tepex composite from LANXESS for the footboard, which has other major application opportunities in lightweight automotive construction.
According to LANXESS, the material is 20% lighter but just as rigid as sheet steel or aluminium.
The composite material Tepex dynalite from LANXESS subsidiary Bond-Laminates is performing excellent even in extreme sports applications. This material is a high-performance, continuous fibre-reinforced and polypropylene-based composite. It is used in the RANGE X-ALPS paraglider reclining harness manufactured by Skywalk & Co. KG during a competition challenging the athletes to cross the Alps by paraglider and on foot. The harness’s footboard is made of a sandwich composite just one centimeter thick, comprising thin Tepex facings measuring just 0.5 millimeters and a polypropylene honeycomb core from EconCore.
To control a paraglider, the pilot must shift his body weight, while maintaining muscle tension. This is achieved by pushing the feet against the harness’s footboard. In extreme situations, such as sudden turning maneuvers when approaching a steep rock face, very high forces are applied to the footboard, comparable to fully depressing the brake pedal in a car to avoid an accident. “The footboard can easily withstand these loads. The flexural rigidity and flexural strength of such sandwich structures can be higher than that of sheet steel or aluminum depending on the thickness of the facings and the honeycomb core – but they have a much lower weight per unit area,” explains Harri Dittmar, an applications engineer for Tepex.
The tough Alpine course requires pilots to have a high level of physical fitness, but also the lightest possible equipment. “We tested the sandwich sheets extensively and are very pleased with the low weight combined with the high rigidity and strength,” says Manfred Kistler, general manager of Skywalk. The sheets are 20 percent lighter than earlier versions made from a carbon fibre-reinforced epoxy resin. The harness therefore weighs just slightly more than one kilogram. Another advantage is the low costs; the new component costs 25 percent less than the epoxy system.
LANXESS also sees major opportunities for sandwich composites of this kind in lightweight automotive construction, particularly in larger parts requiring rigidity, such as trunk floors, fuel tank covers, range extender housings, structural battery housings and seat components. “The composites could serve as an alternative to glass fibre mats or polyurethane spray foams for manufacturing trunk floors in passenger vehicles. One advantage for processors: They would no longer have to deal with reactive chemical systems and could eliminate considerable costs for equipment and safety systems,” explains Martin Klocke, manager for Lightweight Construction Business Development at the LANXESS High Performance Materials business unit. Fuel tank covers, which form part of the trunk space, are another conceivable application. They would be significantly lighter than their counterparts made of sheet steel or aluminum. Functions such as slots, guides or mounts can be integrally moulded in the covers in a single processing step to further cut costs.
EconCore has developed a fully automated production system called ThermHex to manufacture honeycomb sandwich panels with Tepex composite skins. “Thanks to this technology, we can produce these ultra-strong sandwich structures cost-efficiently and in high, reproducible quality,” says Tomasz Czarnecki, technology manager of the company, which is based in Leuven, Belgium, but also maintains a production site in Halle/Saale Germany, through its ThermHex Waben subsidiary.
LANXESS provides extensive customer support in the development of components made of sandwich composites with Tepex facings. These services are part of its HiAnt customer service package. The HiAnt brand encompasses all of LANXESS’ engineering expertise concentrated in its High Performance Materials business unit. This know-how extends to thermoplastic materials, composite technologies, component testing, simulation methods and processing. Paraglider manufacturer skywalk likewise benefits from HiAnt. “The sheets are delivered to us already cut by water jet, and that’s a great extra, which saves us a time-consuming finishing step,” says Kistler.
Photo provided by LANXESS.
Cobra International is celebrating its 40th year and has commissioned a book that will look at 40 key projects and 40 key people that were integral to the company’s growth. ‘Klaus Simmer and The King Cobra: A breakthrough in surfboard design and production technology’ is an extract article from this book and a breakthrough composites product for Cobra, establishing its presence as a manufacturer of high performance windsurf boards and creating global visibility for the Cobra brand.
Fibrelite reports that since the start of its partnership with Trenwa more than 100 precast trench systems integrating Fibrelite composite covers have been sold for use in electrical substations, wastewater treatment plants, chemical refineries and many other applications across North America.
University of Southern Queensland (USQ)’s composites research and development was on display when the Centre for Future Materials (CFM) held its inaugural Open Day.