NetComposites
Attwater

Bayer MaterialScience Optimises Polyurethane Systems for Automotive Clearcoats

03 February 2015

Bayer MaterialScience has developed a unique technology for coating plastic parts on automobiles at low temperatures.

 

According to Bayer, bumpers, mirror housings, spoilers, tailgates and roof modules are finished with their outer clearcoat at an energy- and cost-efficient temperature of just 80 °C. Although curing is as much as 30 percent faster than with proven two-component polyurethane coatings, appearance is still very good. Bayer MaterialScience explains that, in the medium term, this technology will offer the possibility of coating plastic, composite and metal automotive parts together for the first time.

 

It says, a new car needs to look good and convey a sense of aesthetics and value, and its clearcoat is responsible for the external appearance. It is the last layer to be applied to the body, and gives the vehicle its high-gloss finish. Two-component coatings formulated with polyurethane (PUR) raw materials from Bayer are described as invaluable for this. Along with their appearance, they also boast excellent resistance to weathering, chemicals and impact.

 

Although many bodywork parts are still made from sheet steel, plastics are increasingly used for add-on automotive parts, Bayer says there is only one way of reducing fuel consumption and CO2 emissions. To ensure that the coated plastic parts look just as good as the coated metal, they are coated in exactly the same way, but at a lower temperature.

 

Bayer says, when using conventional, uncatalysed coating technology, plastic parts generally need several days to dry completely after being coated with two-component polyurethane coatings. This leads to delays in further processing and requires special measures for storing the coated parts.

 

For some time, catalysts have therefore been used for curing. However, their use means that crosslinking begins immediately upon application. As a result, the coating cannot flow freely and does not achieve an optimal appearance. All previous attempts to satisfy the need for rapid curing without compromising on appearance have failed.

 

At the heart of the new technology is a thermolatent hardener, explains Bayer. This makes it possible to separate film formation and curing. "The coating initially flows smoothly on the substrate and forms an even film," said Dr. Jan Weikard, Head of Application Technology in the Automotive/Transportation segment of the Coatings, Adhesives and Specialties Business Unit at Bayer MaterialScience. "Only when the temperature rises is the hardener present in the coating activated by a special latent catalyst. This ensures the coating dries rapidly on the plastic substrate."

 

No significant changes to the coating formulation are required. Thermolatent two-component PU systems can therefore be used for coating plastic add-on parts in series production without any problems. Even in cases where the faster drying is not such an advantage, the new development is still said to enable the parts to be processed with greater ease and speed after baking.

 

Constructing lightweight vehicles continues to be of great interest to the automotive industry. "Our technology opens up new and very promising opportunities for introducing lightweight construction concepts in mass production," said Zivko Andelkovski, Head of Industrial Marketing Automotive at the Coatings, Adhesives and Specialties Business Unit. "Low-temperature clearcoat technology is the first milestone to achieving this. Further development of our raw materials in the fields of primer surfacer technology, underbody protection, seam sealing and adhesive bonding will make it possible in the medium term to complete the entire process at low temperatures and lead to a breakthrough for lightweight mass-produced vehicles."

 

Bayer claims that, compared to the best practice process available today, the technology allows energy savings of 15 percent and a reduction of CO2 emissions by 10 percent. This is the result of a joint study carried out by Bayer, a car manufacturer, a coatings formulator, a manufacturer of coating lines and a company for sustainability certification.

 

Thanks to the lower curing temperature, it will be possible in the medium term to coat plastics, composites and metals together. "This is a first for in-line coating," explained Andelkovski.

 

Initial samples are expected to be available for development partners starting the first quarter of 2015, with market launch to follow. The low curing temperature also offers future opportunities for using alternative energy sources. For example, district heating could be used to heat the ovens for drying the coatings. Another possibility would be to use cogeneration or waste heat from other manufacturing processes to produce the energy required.






Related / You might like...

Cobra Publishes Surfboard Case Study from 40 Years Book

Cobra International is celebrating its 40th year and has commissioned a book that will look at 40 key projects and 40 key people that were integral to the company’s growth. ‘Klaus Simmer and The King Cobra: A breakthrough in surfboard design and production technology’ is an extract article from this book and a breakthrough composites product for Cobra, establishing its presence as a manufacturer of high performance windsurf boards and creating global visibility for the Cobra brand.

ZSK's Technology Showcase Demonstrates TFP Applications

ZSK will hold its bi-annual technology showcase on 21-22 September 2018 at its Krefeld, Germany, headquarters. The Embroidery Technology Show assembles more than 25 exhibitors from around the world to discuss emerging trends in the embroidery manufacturing industry and demonstrate the latest products produced using techniques such as tailored fibre placement (TFP) or smart textiles.

SGL Carbon Celebrates Opening of Fibre Placement Centre

SGL Carbon and Fraunhofer IGCV have officially opened the Fibre Placement Centre (FPC) at SGL's site in Meitingen, Germany. Compositence, BA Composites and the Chair for Carbon Composites at the Technical University of Munich have also joined the alliance, and Coriolis Group and Cevotec are planning to come on board as partners.