NetComposites
Juniar Spraybooths

UK Project “High-Volume Lightweight Technologies for Vehicle Structures” Awarded Funding 

18 November 2014

A three-year industrial research project entitled ‘High-volume Lightweight Technologies for vehicle structures’ (HiLiTe) has been awarded funding by the UK’s innovation agency, Innovate UK, as part of the Collaborative Research and Development (CR&D) programme, ‘Low Carbon Vehicles, Integrated Delivery Platform Competition 9 (IDP9)’.

 

The £3M project led by Far-UK aims to develop a novel end-to-end process for manufacturing high-volume and low-cost lightweight structural components for the automotive industry.

 

As part of the project consortium, TATA Motors European Technical Centre (TMETC) representing a major international automotive OEM is providing the technical design specification for a structural component concept as a case study. According to Far-UK, the approach is to develop a composite version of the automotive part focusing on three specific aspects: design optimisation, effective selection of material and efficient process definition.

 

The project, which started in March 2014, is to define a glide-path to achieve a 30% weight reduction on the existing steel component and a 40% reduction in costs from traditional composite materials and processing. The other key deliverables are to establish design guidelines to apply ‘right materials in the right place’ principle in the future and to ascertain recommendations to enable the assembly of dissimilar materials. A validated Computer Aided Engineering (CAE) model will be built against the results of real-world component tests.

 

The consortium includes Far-UK as Lead Partner, Expert Advanced Manufacturing Technologies, the National Composites Centre (NCC), TMETC and WMG.

 

The project also aims to provide additional benefits as follows:

-       Lower use-phase emissions achieved by the 30% targeted weight reduction for an equivalent component

-       High temperature capability to enable integration with existing paint shop processes, together with in use operation

-       Technology can be implemented on existing vehicle manufacturing techniques and novel vehicle architectures including, hybrid and electric vehicles

-       Materials and processing technologies anchored in the UK

-       Life Cycle Analysis (LCA) of components and processing routes

-       End-to-end cost analysis of finished parts and vehicle integration

 

Dr Sophie Cozien-Cazuc, Technical Programme Manager at Far-UK, explains “Far-UK is thrilled to be leading a collaborative research project, working with a strong consortium involving a major automotive OEM, TATA Motors, which will enable delivery of an affordable technology for the manufacturing of composite structural components for the high-volume automotive industry. The HiLiTe project will offer technical solutions enabling car manufacturers to seriously consider fibre-reinforced plastic materials for their future platform programmes”.

 

Dr Omar Hadded, Commercial Vice President at TMETC said “This project is typical of the significant contribution the Innovate UK IDP programmes are making to UK automotive R&D. TMETC is committed to developing cost effective lightweight technology for Tata Motors’ future global vehicles and the quality and strength of the partners in this project will deliver excellent results.”

 

The HiLiTe project aims to help the development of UK automotive manufacturing towards lower weight vehicles, which in turn will help reduce transport greenhouse gas emissions.

 

Photo provided by Far-UK.






comments powered by Disqus

Related / You might like...

ACMA Champions Policies to Advance Composites in Infrastructure

At the American Composites Manufacturers Association (ACMA)'s third annual Infrastructure Day on 6-7 February 2018 34 ACMA members joined together to meet with over 100 Members of Congress and their staffs to advance legislation to drive investment in innovative material solutions for transportation, water and energy infrastructure.

Composite Sculpture Fronts Australian Shopping Centre

Shoppers visiting the newly redeveloped Halls Head Central Shopping Centre will be greeted by a 3.5 m x 2.5 m core composite spiral ribbon representing the logo of one of the centre's owners.

KraussMaffei adds Rebar Pultrusion System to TechCentre

KraussMaffei is expanding its expertise in the field of pultrusion, the process for continuously manufacturing fibre reinforced plastic (FRP) components, with the commissioning of a second pultrusion system at its TechCentre in Munich, Germany.