NetComposites
Attwater

Less Petroleum Required for Plastics Production Thanks to Bayer’s CO2 research

26 August 2014

In laboratory tests, Bayer Material Science’s research into carbon dioxide as a new raw material for making plastics has succeeded in significantly further reducing the need for petroleum at precursor level through the incorporation of CO2.

Plastics and their components are normally based entirely on oil. The new process also extends the range of plastics that CO2 can be used to produce. This is the result of the Dream Polymers research project in which Bayer Material Science says it is continuing its activities to find new uses for CO2.

According to Bayer, a technology using the greenhouse gas to produce a key component for high-quality foam (polyurethane) is already moving toward commercial use. The proportion of petroleum in this chemical is 80 percent. "We have now succeeded in reducing the petroleum content for making other plastics to just 60 percent," says Project Manager at Bayer, Dr. Christoph Gürtler.

Carbon dioxide is used twice in the new process. First, the greenhouse gas is incorporated directly into a new kind of precursor (polyoxymethylene polycarbonate polyol), replacing 20 percent of the petroleum. Second, it is also used indirectly, producing a chemical that is also incorporated into the precursor for a further 20 percent saving in petroleum. "As a result, the proportion of alternative raw materials is already 40 percent," remarks Gürtler.

In addition to this, the number of plastics that can be produced using carbon dioxide is increasing. "It is now also possible to manufacture thermoplastic polyurethanes, films and casting elastomers in this way," says Gürtler. Such plastics are used in all kinds of applications, including automotive interiors, cable sheathing and sporting goods such as ski boots.

Bayer claims its researchers have already proved in laboratory tests that the manufacturing process works in principle. "Initial application tests have been positive," confirms Gürtler, but he adds that there is some way to go before the process is commercially viable.

Dream Polymers is being supported by the German Federal Ministry of Education and Research. External institutions in Germany such as the CAT Catalytic Center, the Leibniz Institute for Catalysis and the Fraunhofer Institute for Chemical Technology are also involved.

Bayer sees itself as a pioneer when it comes to future applications for CO2. As part of its Dream Production project, which has already been in progress for some time, the company aims to use carbon dioxide as a component for flexible polyurethane foam at the Dormagen site from 2016 onward. The new material will initially be used to make mattresses.





Share this story


Related / You might like...

USQ Delivers Technology Workshop on Composite Rebars

The University of Southern Queensland (USQ) has partnered with Composites Australia to provide Australian civil and composite engineers with access to the latest knowledge on an innovative reinforcing solution to the costly corrosion of concrete infrastructure.

Huntsman PU Composite Technologies Take Centre Stage at Gent Design Exhibition

Composite products, based on polyurethane technologies from global chemical company Huntsman, are taking centre stage at a design exhibition at the Design Museum Gent, Belgium.

Brazilian Composite Sector Registers Second Consecutive Year of Growth

The Brazilian composite sector expects to close 2018 with a turnover of US$ 685 million, a high of 3.8% compared to the previous year.