NetComposites
3M

Composites Evolution to Exhibit Ecopreg PFA at Composites Engineering 2013

11 November 2013

Composites Evolution will showcase its Ecopreg PFA biocomposite prepreg at the Composites Engineering show, which takes place on 12-13 November at the NEC Birmingham, UK.

The range, which includes both glass/PFA and flax/PFA bioresin prepregs, is based on aligned fabrics, and is the result of over four years’ extensive research and development.

PFA (Polyfurfuryl Alcohol) is a thermosetting bioresin derived from crop waste such as sugar cane bagasse and is similar in nature to a phenolic resin. Aside from its environmental credentials, PFA has fire retardant properties equivalent to phenolics, as well as excellent chemical resistance.

Composites Evolution’s PFA high performance bioresin prepregs can be natural flax, jute, glass or basalt. The materials offer a combination of light weight, high mechanical properties, excellent fire retardant properties and low environmental impact. The prepregs can be consolidated by vacuum, autoclave or press and are designed for a range of applications in mass transport, aerospace, furniture and construction.

The glass/PFA prepreg systems have been shown to have excellent fire resistance and are able to compete with glass-phenolics. The flax/PFA prepregs are 100% bio-derived, as they are made using Biotex Flax fabrics to provide the levels of performance and processability normally associated with glass reinforced materials. This is the first time that PFA and Biotex have been combined in this way, giving the benefits of Biotex Flax material with a sustainable resin which does not have impact the food supply chain.

Dr Brendon Weager, Managing Director of Composites Evolution, said "We're delighted to showing these products in the UK for the first time, and we are already working with a number of key customers who are obtaining excellent fire and mechanical performance results."

Composites Evolution will present its full range of sustainable composite materials, including rovings, textiles and prepregs, at their stand C128 at Composites Engineering 2013.

Photo provided by Composites Evolution.






Related / You might like...

Composites Europe 2018 Highlights Contributions of Composites to Sport

Applications for composites in the sports and leisure sector will be showcased by various exhibitors at Composites Europe in Stuttgart, Germany, on 6-8 November.

Alvant Supports £28m Safran-Led Aircraft Landing Gear Project

Alvant has been appointed to work on a two-year, £28 million project titled Large Landing Gear of the Future, which aims to deliver a 30% weight reduction and assist the aerospace industry’s drive to reduce fuel consumption and carbon emissions.

3D Printed Drone Prototype Wins Red Dot 2018 Design Award

Hexadrone’s 3D printed Tundra prototype, manufactured by CRP Technology via laser sintering (LS) technology using Windform SP and Windform XT 2.0 carbon composite materials, has won the Red Dot Award 2018 in the drone category.