NetComposites
Southern Manufacturing

Siemens Opens World's Largest Wind Turbine R&D Test Facilities

02 April 2013

Siemens Energy has opened two major research and development test facilities for wind turbine technology in Denmark.

The new test centre in Brande features test stands for major components of Siemens wind turbines, including generators, main bearings and complete nacelles. In Aalborg, seven blade test stands are capable to perform full scale tests of rotor blades, including the world's largest blade in operation with a length of 75 meters. In combination, the two facilities form the world's largest R&D test centre for wind turbine technology.

"Our investments in testing today will result in savings for our customers tomorrow"; says Felix Ferlemann, CEO of the Siemens Wind Power Division in Siemens Energy. "With our extensive tests of all major components of a wind turbine we can significantly reduce the risk of technical issues in the field. Our continued commitment to R&D and testing enables us to deliver wind turbines that are both the most innovative and the most reliable at the same time."

The two test centres in Denmark feature indoor testing facilities of more than 27,000 square meters. The nacelle test stands in Brande are among the most advanced in the industry. They are capable of testing Siemens' D6 direct drive platform, the company's largest current wind turbines with a six megawatt rated capacity, and are prepared to test even larger turbines.

The seven blade test stands in Aalborg and three blade tests stands in Brande together form the largest blade test facility in the world both in size and in scope. The Aalborg facilities are able not only to fully test Siemens' 75-meter long B75 blade, the largest wind turbine blade in operation, but also even larger blades. Wind turbine blades are now bigger than any other composite structure in the world. For example, the wing of an Airbus 380 is less than half as long as the B75 blade.

In its new test facilities, Siemens can perform Highly Accelerated Lifetime Tests (HALT) on all major components of its direct drive and geared wind turbine platforms. In HALT testing programs, which can last to up to six months, Siemens exposes prototypes to much higher loads than they would normally experience over the course their full life-time in the field.

"In HALT tests, we compress the biggest loads over a short time, as they affect the turbine the most", says Siemens Wind Power CEO Ferlemann. During the HALT test of blades, for example, full-scale prototypes are oscillated at larger deflections than they would ever experience on site for 2 million cycles vertically and then for another 2 million cycles horizontally.





Share this story


Related / You might like...

AMRC Works With Prodrive to Accelerate Composites Recycling Challenge

One of the most respected and successful names in motorsport is working with lightweighting and materials researchers at the AMRC to advance its processes for manufacturing recyclable composite components that extend useful lifetimes and reduce tooling costs.

‘Inspired from Life, We Reinforce Life’ Says Kordsa’s New Campaign

Kordsa, operating in tire, construction reinforcement and composites technologies market with its mission ‘We Reinforce Life’, has launched a new campaign with the slogan ‘Inspired from life, we reinforce life’.

Chomarat Invests in its Coatings & Films Business: New Extruder, New Graining Line

Chomarat is developing its Coatings & Films business at its French sites. The Group has just acquired an extruder and a graining line to increase its production capacities and develop new, more efficient solutions, particularly in the field of TPO (polyolefin thermoplastics).