NetComposites
Juniar Spraybooths

Teknor Apex’s New Nylon 6/12 Provide Practical Alternative in Automotive Fuel Handling

11 September 2012

Amidst current automotive industry concerns about nylon 12 supplies, Teknor Apex has introduced two new injection moulding compounds based on nylon 6 /12 that provide comparable performance in the fuel-line components that comprise the major application for nylon 12.

“New Chemlon 813 CI and 830 GHI fibre-reinforced compounds based on nylon 6 /12 polymer provide the excellent chemical resistance and low moisture absorption required in fuel line components,” according to Jeff Schmidt, Automotive Market Manager. He noted that the compounds are already in commercial use for one such application.

Teknor Apex says the 13% loading of carbon fibre in the Chemlon 813 CI product provides antistatic conductivity often called for in fuel line components. Chemlon 830 GHI compound has a 30% loading of glass fibre for enhanced strength and rigidity in applications such as connectors. While some nylon polymers present problems in holding to desired part dimensions because of high levels of moisture pickup, the new nylon 6/12 compounds gain only slightly more moisture than nylon 12, according to Schmidt. “Finished part dimensions are acceptable in existing tooling used for nylon 12,” he said, “with little to no modification needed. At the same time, Chemlon 800 Series materials process in shorter cycles and at higher melt temperatures than nylon 12.”

The chemical resistance exhibited by Chemlon 800 Series compounds is very high, Schmidt noted. “Extensive testing has shown the compound to be well suited for fuel handling uses.” Teknor Apex explains that automotive has long been the largest market for Chemlon nylon 6, 6/6, 6/10, and 6/12 compounds. “For manufacturers seeking alternatives to nylon 12, Teknor Apex provides extensive automotive industry experience, expertise in custom compounding, and strong engineering support,” said Schmidt. “With nylon operations in the USA, the UK, and Singapore, we have sufficient compounding capacity to meet new demand for nylon 6 /12.”






Related / You might like...

Fibrelite and Trenwa Partner on Trench Systems

Fibrelite reports that since the start of its partnership with Trenwa more than 100 precast trench systems integrating Fibrelite composite covers have been sold for use in electrical substations, wastewater treatment plants, chemical refineries and many other applications across North America.

USQ Hosts Centre for Future Materials Open Day

University of Southern Queensland (USQ)’s composites research and development was on display when the Centre for Future Materials (CFM) held its inaugural Open Day.

Haydale Delivers Composite Pipeline Sealing System to National Grid UK

Haydale has produced and delivered eight composite general transition piece (GTP) sealing systems to National Grid UK, and has received an expression of interest for a further 60 over the next six years.