03 July 2012
03 July 2012
Victrex and Tissa Glasweberei have co-developed innovative composite fabrics to be marketed under Tissa’s brand name TIXPREF.
Victrex explains that these fabrics are made out of unidirectional tapes formed from S-2 Glass or carbon fibres that have been fully impregnated with high performance Victrex PEEK polymer. They say these TIXPREF composite fabrics assist customers in drastically reducing the cycle time, up to 50% (and even more for thin walled parts), required for press forming of the fabrics into composite parts.
Tissa says its TIXPREF fabrics offer numerous advantages, including excellent mechanical properties that result from the high fibre content of up to 65%. Being thermoplastic in nature, Tissa explains TIXPREF fabrics have a higher damage tolerance when compared to thermoset-based fabrics, high fatigue strength and stiffness, and excellent integration of the fibre with the matrix, resulting in a longer lifetime for the composite part, plus a reduction in its structural weight. The fabrics are easy and safe to handle, thus well suited for automated processes and out-of-autoclave manufacturing methods.
"These characteristics exploit the outstanding performance properties of Victrex PEEK polymer," said Albert Vodermayer, European Composites Market Leader at Victrex Polymer Solutions. "They include a service temperature of up to 260°C (500°F), high resistance to harsh chemicals and solvents, and exceptional wear resistance, to provide superior mechanical properties under both static and dynamic load conditions. Tissa fabrics are environmentally friendly since Victrex PEEK polymer is solvent-free and recyclable and being thermoplastic in nature they can be stored at ambient temperature eliminating the need for expensive cooling and storage costs."
Following a positive client response to first samples, Tissa sys it has gone one step further and developed non-crimp fabrics (NCFs), utilising Victrex PEEK polymer. Non-crimp fabrics are constructed with two sets of fibres, to prevent undulation of the reinforcing fibres. In the case of TIXPREF fabrics, this means the tapes are positioned straight in the fabric, and this allows maximum stiffness of the consolidated part. Tissa explains its flexible production techniques allow multiple combinations of fibres and matrices. The resulting composite fabrics are tailored for use in aerospace, and in industrial and medical applications that do not have complex shaped parts, such as flat structures and panels. By heating the prepregs and press forming for two to three minutes, a panel thickness of only 2mm (0.078in) is possible. However, they say the use of specialised moulds enables production of sophisticated parts with strips or inserts, or both.
Samples are available, and Tissa is actively working with OEMs, designers and parts and mould manufacturers to replace metals and thermosets with composite fabrics made with Victrex PEEK, in a broad range of applications.
Thai Flight Training (TFT), a subsidiary of Thai Airways, recently ordered an Airbus A320 door trainer from Spatial Composite Solutions.
NTPT is collaborating with the Ecole polytechnique fédérale de Lausanne - Swiss Centre of Technology (EPFL) and other partners to research discontinuous fibre composite tubes for high performance applications.
Gulf Aviation Academy (GAA) recently ordered a Boeing 787 door trainer from Spatial Composite Solutions, complete with Spatial’s virtual slide trainer.