10 September 2010
10 September 2010
NetComposites will be displaying the extended range of Biotex twistless flax materials at Composites Europe 2010, including a new +/- 45º biaxial fabric. The materials use a unique Twistless Technology to provide high levels of performance and processability normally associated with glass reinforced materials.
Biotex Commingled Flax/PP, Biotex Commingled Flax/PLA and Biotex Flax yarns, fabrics and preconsolidated sheets were successfully launched a year ago at Composites Europe 2009 and have been rapidly gaining acceptance in a range of applications.
2010 sees the introduction of non-crimp fabrics to the range, allowing higher performance and rapid material lay-down in hand lay-up, vacuum infusion and RTM processes.
The Biotex materials are based on twistless yarns with long, aligned fibres to exploit the inherent mechanical properties of flax in load-bearing applications, with the added advantage of having a lower weight than conventional reinforcements such as glass fibres. These materials offer far superior mechanical properties than those in injection moulded or press moulded parts where the natural fibres are generally short and randomly oriented.
These non-crimped materials are believed to be the first of their kind, and offer a combination of sustainability, performance and processability not previously seen in composites.
Flax fibres are renewable and have a low environmental impact during processing. The matrix in commingled Biotex Flax/PLA is also derived from crops, giving a 100% renewable material that can also be recycled or composted at the end of its life.
Using Twistless Technology, the natural fibres in Biotex yarns are highly aligned to give up to 50% better fibre efficiency over conventional twisted yarns. The yarns are also easier to impregnate, giving improved fibre/matrix interaction and better performance.
The twistless fibres in Biotex yarns allow fast wet-out and impregnation. Biotex Flax/PP and Biotex Flax/PLA commingled materials include an intimate blend of the reinforcement fibre and matrix polymer for easy processing by vacuum consolidation or press moulding.
Biotex Twistless Technology is backed up by 130 years of experience in spinning, weaving and finishing natural textiles, coupled with decades of experience in composite materials, processing and applications.
Biotex is at the Composites Europe Show in Hall 10-11 / stand B06 at this year’s Composites Europe show in Essen, September 14th - 16th.
LM Wind Power's first two sets of LM 66.6 blades have been installed on Shanghai Electric Wind Power's 4.0 MW-136 wind turbine in China.
Haydale has produced and delivered eight composite general transition piece (GTP) sealing systems to National Grid UK, and has received an expression of interest for a further 60 over the next six years.
AeroNed has been appointed the authorised location for BriskHeat’s ACR hot bonder calibrations and repair in Europe. Located in the Netherlands, AeroNed will perform these services for BriskHeat’s ACR 3 Hot Bonders and ACR MiniPRO Hot Bonders.