01 October 2010
01 October 2010
Owens Corning has introduced Ultrablade fabric solutions to help enable the market transition to longer, lighter and stiffer wind turbine rotor blades.
The new solutions, which will be commercially available in January 2011, are intended to help designers remove nearly a metric ton of reinforcement and resin from 2.0 megawatt (MW) wind turbines compared to same-size blade sets made with traditional E-glass.
According to Owens Corning, compared to standard fabrics, Ultrablade fabrics in epoxy resin can:
• Reduce spar weight by up to 18 percent while keeping length constant
• Increase blade length by up to 6 percent
• Improve blade stiffness by up to 20 percent
• Decrease blade thickness by up to 6 percent to increase aerodynamic efficiency and generate higher torque for driving turbines
• Reduce total blade weight by up to 5 percent to ease the load on the turbine and tower, and enabling turbines to operate effectively at lower wind speeds
“Ultrablade fabric solutions give designers much more freedom in developing longer blades for today’s large turbines,” said Dr. Chris Skinner, director of global technical marketing for OCV Technical Fabrics.
“As the market continues to move to larger-capacity wind turbines needing longer blades, designers can use a combination of several improved properties in different areas of a blade,” continued Skinner. “They can choose to increase blade length for any given weight while keeping the thrust constant and assuring sufficient tower clearance. At lower wind speeds, weight-saving Ultrablade fabric solutions can help increase a blade’s aerodynamic lift, torque and energy output. The end-result will be higher annual energy production from optimized blade designs using high-performance fabrics.”
The company is using a distinctive PINK stitching to identify Ultrablade fabric in the marketplace. Ultrablade fabric solutions will be produced in a number of the company’s facilities globally. In China, the products will be manufactured at plants in Changzhou and Doudian.
At the end of 2009, wind power in China accounted for 25.1 gigawatts (GW) of electrical generating capacity and the country has identified wind power as a key growth component of its economy. China is now the largest producer of wind turbines and the second-largest producer of wind power, after the United States.
According to the Global Wind Energy Council, China is expected to remain one of the main drivers of global growth in the coming years with annual additions of more than 20 GW by 2014. This development is supported by a very aggressive government policy and the growth of the domestic industry. The Chinese government has an unofficial target of 150 GW of wind capacity by 2020.
Cobra International will showcase a range of composite products at CAMX 2018, including carbon fibre components for the automotive, transportation, marine, water sports and luxury sectors.
Coriolis Composites has been selected by the National Institute for Aviation Research (NIAR) at Wichita State University (WSU), US, to provide a thermoplastics capable Automated Fibre Placement (AFP) system.
UK company Prodrive Composites has developed a process for manufacturing recyclable composite components that can satisfy future end-of-life requirements without any compromise in the performance of the original parts. The company says the P2T (Primary to Tertiary) process not only simplifies recycling, but endows a composite material with the potential to fulfil three or more useful lifetimes.