NetComposites
Advanced Engineering 2018

University of Dayton Research Institute Receives $3 million for Nanocomposite Research

04 June 2010

A $3 million Ohio Third Frontier award to the University of Dayton Research Institute will fund the scale-up and production of a new nanomaterial that will allow composites to multitask

Suggested application areas are a wind turbine tower that can de-ice its own blades in winter or store energy to release on a calm day, powering a grid even when its blades are not moving; or a military vehicle whose armour can serve as a battery, powering some of the vehicle's electrical components.

Nicknamed ""fuzzy fibre"" by its inventor at the University of Dayton Research Institute, Nano Adaptive Hybrid Fabric (NAHF-XTM) is a tailored nanomaterial that he says is capable of being produced in sizes and quantities large enough to make it affordable and viable for large-scale commercial use. When incorporated into resins, the fibres enable composites to be tailored for electrical and thermal conductivity, chemical and biological sensing, energy storage and conversion, thermal management and other properties.

""This is going to disrupt the way we think about materials,"" said NAHF-XTM inventor Khalid Lafdi, group leader for carbon materials at the Research Institute. ""From now on, instead of thinking 'mono,' we will think 'multi' - multiscale, multifunctional, multitasking.""

Lafdi added that, aside from serving simply as structural material, composites made with fuzzy fiber can work as batteries, sensors, heaters, supercapacitors, structural health monitors and other systems whose operations are normally performed by additional components.

""By manufacturing structural material that can serve multiple functions, fewer parts are needed for any given application, which means reduced cost, lighter weight and greater efficiency,"" Lafdi said.

""Everybody is growing carbon nanotubes on substrates,"" Lafdi said. ""We're the only people who are producing them on a large-scale and continuous process, and not just in batches. This means we can produce the material at a low cost, and it also means we can produce pieces big enough to cover an aircraft.""

Lafdi and his team have been producing 500 feet of 12-inch-wide fabric per day at a pilot plant in the Research Institute's Shroyer Park Center. The University of Dayton Research Institute and Ohio collaborators Goodrich, Owens Corning and Renegade Materials will match the Third Frontier award, announced May 26 in Columbus, to fund the creation and equipment of a full-scale production facility for the hybrid fabric. The new facility, to be located within Dayton's Aerospace Hub, will be equipped to produce 60-inch-wide fabric. Goodrich expects to apply the technology in the marketplace first for commercial aerospace applications.

The NAHF-XTM technology was pioneered and perfected over seven years with funding from the Air Force, Army, aerospace industry and Third Frontier, said Brian Rice, University of Dayton Research Institute division head for multi-scale composites and polymers. After successfully controlling growth of carbon nanotubes on individual carbon fibers, researchers accomplished the same on a type of carbon-fiber yarn and eventually on engineered textiles. The breakthrough was in overcoming issues of uniformity and precisely controlling growth of the nanotubes, Rice said.

""Various industries have been replacing metals with composites in structures and components because of their lighter weight and durability. But in doing so, electrical and thermal conductivity inherent to metals is lost. By growing nanotubes on carbon fibers used in composites in a very specific manner, those properties are built back in and the composites also can be tailored for specialized mechanical properties.""

Rice said the hybrid fabric production facility will serve as a cornerstone for Ohio's Aerospace Hub in Dayton by helping to attract and connect new and existing businesses related to aerospace, sensing technologies and advanced materials. One targeted application will be unmanned aerial vehicles weighing less than 150 pounds. ""We'd like to begin making 'smart' structural materials for UAVs that also serve as the plane's communication, power and sensor systems. Not having to add a battery or external sensors means less weight on the plane.""

The program is expected to create 70 high-tech jobs in Ohio during its first three years and 165 jobs in the second five years.






Related / You might like...

Compcut 200 Increases Testing Productivity at Renault Sport Racing

Sharp & Tappin has installed and commissioned a Compcut 200 composite plate saw at Renault Sport Racing in Enstone, Oxfordshire, UK.

Alvant Supports £28m Safran-Led Aircraft Landing Gear Project

Alvant has been appointed to work on a two-year, £28 million project titled Large Landing Gear of the Future, which aims to deliver a 30% weight reduction and assist the aerospace industry’s drive to reduce fuel consumption and carbon emissions.

Electric GT’s Tesla P100DL Features Bcomp Flax Fibre Technologies

Electric GT Holdings and SPV Racing recently unveiled the race-ready version of the EPCS V2.3 Tesla P100DL at Circuit de Barcelona-Catalunya. The car features lightweight body parts made using Bcomp's ampliTex and powerRibs natural fibre composite reinforcement products, contributing to a 500 kg weight reduction over the road edition.