NetComposites
Thermwood

Improving the Finish of Automotive SMC

13 May 2007

Research stemming from recent EUREKA project E! 2373 SURFAS hopes to contribute to the increased use of Sheet Moulding Compound (SMC) composites in the automotive industry.

""These composites are starting to be used more widely as a replacement for steel in automotive body panel applications,"" says Véronique Michaud from main project participant the Polymer and Composite Technology Laboratory in Lausanne. ""They suffer, however, from major drawbacks in terms of reliability, of surface appearance and performance. Simply stated, it is extremely difficult to obtain, in a reliable manner, a surface quality that matches that of steel, especially after the painting operation.""

The goal of the SURFAS project was to investigate problems of surface quality in SMC composites. Partners identified the presence of surface craters or pits on composite parts. ""At that point, nobody knew why these craters appeared,"" explains Michaud, ""so a main goal was to understand what was happening, at all stages of the process, from fibre production and the deposition of the sizing layer to compounding of the composite pre-product, up to the final processing of the part. From there we hoped to make proposals on how to modify either the base material or the process to better control surface quality.""

The project delivered an array of important scientific results. Partners gained a better understanding of the role of fibre sizing and over-sizing on the fibre assembly surface and how parameters such as energy, permeability and rigidity, affect final product quality. They also investigated the exact mechanisms of the so-called 'low profile effect', where a blend of thermoplastic and thermoset resin is used to improve the final surface quality.

Dr. Michel Arpin works for SURFAS industrial partner Vetrotex International and says the project was an excellent opportunity to investigate a technical issue from a more scientific perspective. ""The direct outcome for our company is two-fold,"" he says. ""First, we are now better armed to develop new products in this or similar domains of application, thanks to all the technical knowledge that we gained. This project has helped us to point out clearly how complex the materials-process-performance interaction is with this type of composite material.""

""EUREKA gave us the opportunity to cooperate on a European level,"" added Michaud, ""without the heavy administrative constraints of a typical European project. All partners could deal with their local funding agencies, with whom they were already familiar and who reacted quickly and remained closely involved in project progress.""





Share this story


Related / You might like...

Relining Solution Restores Drinking Water Supply in Amsterdam

After the collapse of a drinking water pipeline in downtown Amsterdam, the Netherlands, Insituform was contracted to reline a close to 100 year old pipe underneath one of the canals. Water was restored successfully within five days, with minimal impact on traffic and the environment.

Prodrive Develops Process for Recyclable Thermoplastic Composites

UK company Prodrive Composites has developed a process for manufacturing recyclable composite components that can satisfy future end-of-life requirements without any compromise in the performance of the original parts. The company says the P2T (Primary to Tertiary) process not only simplifies recycling, but endows a composite material with the potential to fulfil three or more useful lifetimes.

Elemental RP1 Sports Car Showcases Capabilities of Tailored Fibre Placement

Designers at Elemental Motor have utilised tailored fibre placement (TPF) to extend the use of carbon composites in its RP1 sports car.