CU Professor's Biodegradable Composites Made from Plant Materials go to Market

23 April 2007

CU Professor's Biodegradable Composites Made from Plant Materials go to Market Biodegradable composites made entirely from plant materials, developed by Anil Netravali, Cornell professor of fibre science and apparel design could soon to be found in commercial products.

Anil Netravali, professor of fibre science and apparel design, holds a sample of his biodegradable substitute for particleboard, made entirely of natural fibres and soy-based resin. Because the product is much stronger than fibreboard it can be made as a partially hollow sandwich, greatly reducing weight and shipping costs. On the table are samples of sisal fibre and other composites.

Netravali has been working for several years to create the composites, and last year he partnered with Pat Govang, the former industrial partnerships director for the Cornell Center for Materials Research, to form e2e Materials LLC, to sell a product based on one of his patents: ""green"" biodegradable composites made entirely from plant fibre and a resin derived from soy protein.

The new company's first product will be a replacement for particleboard. According to Govang, e2e has the only cost-competitive one, and it is several times as strong as particleboard; that means the same strength with less weight, reducing shipping costs. Early customers include Herman Miller, a leading office furniture company.

A lot of office furniture and low-cost home furniture is made of particleboard covered with various laminates, and the current supply chain isn't very efficient, says Govang. Typically, particleboard is made from trees grown in one part of the country, shipped elsewhere to be made into particleboard, which is then shipped to the furniture factory as 4x8 sheets that must be cut to the needed size.

Govang says e2e will make its products from soy and fibres grown in New York state, and that the fibres -- mostly flax and bamboo, -- can be grown on farmland now considered marginal and lying unused. ""Rural poverty levels in upstate New York are significant and increasing; we see this as an opportunity and would like to have a positive impact on the agricultural base here,"" he said.

Netravali said that the resin-making process complements the manufacture of biodiesel fuel from soybeans: Biodiesel is made from the oil, and Netravali's resin is made from the remaining meal after extracting the oil. The new company is negotiating to work with a biodiesel plant being developed by the State University of New York at Morrisville.

As an added selling point, e2e's composites will be formed by compression moulding to the exact size and shape the furniture factory needs, reducing their manufacturing costs.

After deciding to form their company, Govang and Netravali attended a Pre-seed Workshop sponsored by the Cornell Center for Technology, Enterprise and Commercialization, the Center for Life Science Enterprise -- the technology transfer unit of the Cornell Institute for Biotechnology and Life Science Technologies -- and the Cornell Center for Materials Research. The workshop organises start-up company ""wannabees"" into teams consisting of an inventor, a business person, a lawyer and students from Cornell's Johnson School to determine whether a business idea is viable. The climax is a pitch to a panel of real venture capitalists.

""The pre-seed was a great experience,"" Netravali said. ""They give you a complete idea of what is involved in starting a business, how to go from one step to the next, how to get investors.""

Experience gained in the workshop paid off with top honors from Unytech '06, a pitch event hosted by the Upstate Venture Association of New York, a technology transfer grant to Cornell from the New York State Office of Science, Technology and Academic Research for further development of the process, and a Grant for Growth from the Metropolitan Development Association of Syracuse. On April 5, e2e won a $100,000 prize in the first Emerging Business Competition, sponsored by M&T Bank and the New York Business Development Corp. The company is negotiating for further funding from Excell Partners, a not-for-profit venture capital enterprise created by the University of Rochester, and BR Ventures, a student-run venture capital enterprise at Cornell.

The company is trying to grow without commercial venture capital, Govang said, because that requires giving up control. ""We're taking a long view,"" he said.

Netravali is happy to let Govang handle such things. ""My contribution to the company is the basic research, coming up with different kinds of resins that can be fed into the company, while benefiting Cornell at the same time through patents,"" he said.

The company expects to commercialize future ideas from Netravali's lab and maintain other Cornell connections. For example, Govang said, Johnson School students helped with market and supply chain research, and the company will soon recruit a couple of Cornell engineers.

comments powered by Disqus

Related / You might like...

Funding Offered for UK Exporters at Trade Shows

The UK's Engineering Industries Association (EIA) and the Manufacturing Technologies Association (MTA) have received confirmation of government funding for UK engineering companies to exhibit at overseas trade shows.

International Consortium Studies Energy Storage Systems

AZL Aachen, in cooperation with 19 participating companies, RWTH Aachen University and CONBILITY, has launched an international market and technology study focused on energy storage systems.

ASTi Selects Solvay’s Ryton PPS for Industrial Sensor Housings

Solvay reports that Advanced Sensor Technologies Inc (ASTi) has selected Ryton polyphenylene sulphide (PPS) to mould protective housings for two industrial-grade sensors.