NetComposites
3M

Australian Composite Walls Flood Defence System Is Being Tested by Deltares

03 January 2017

Australian Composite Walls Flood Defence System Is Being Tested by Deltares

Australian Composite Walls is a continuous, inter-locking composite wall system developed by Comtec in Australia using composite profiles by Exel Composites.

According to Exel, the wall system is made up of sheet sections that are fixed to piles. The Australian Composite Walls seawall construction gives good protection against flooding, protects the shoreline and stops erosion. Exel Composites says it has supplied both profiles for the system.

Exel explains that composite profiles guarantee the maximum corrosion resistance in demanding environments. They also provide high strength and stiffness and they are light weight.

Deltares, an independent institute for applied research in the field of water and subsurface, will use Delta Flume, its unique test facility, where it is possible to test at full scale the effect of extreme waves on dikes, dunes, breakwaters and offshore structures.

The Australian Composite Walls in the Delta Flume is a 8.5 m high structure, consisting of two sheet pile walls with sand in between and a sand berm behind it. Exel explains that the test starts with a moderate hydraulic load and step-by-step increase it until damage occurs or all scheduled tests have been carried out.

“We are very excited to be part of this innovative solution which is utilising well the unique characteristics of composites,” says Kari Loukola, SVP Sales & Marketing at Exel Composites.

First installations were made earlier this year and Exel expects these full-scale tests to confirm the performance of composites in the most demanding environments.

 


Photo provided by Exel Composites





Related / You might like...

UK Composites Industry Backs Health and Safety Strategy

Composites UK reports that its members are supporting the new 2018-2021 Safety in Manufacturing Plastics and Composites strategy (SIMPLC).

Composites Europe 2018 Presents Alternatives to Adhesive Technologies

Composites are considered hard to join and researchers have predominantly focused on mechanical joining technologies including crimping, gluing, riveting or screwing. The Composites Europe exhibition in Stuttgart, Germany, on 6-8 November will show the advantages and drawbacks of each of these processes.

AZL and IKV Study Thermoplastic Tapes in Injection Moulding

The Aachen Center for Integrative Lightweight Production (AZL) and the Institute of Plastics Processing (IKV) at RWTH Aachen University are commencing a study into the use of thermoplastic tapes in injection moulded parts. Companies interested in joining the study are invited to a kick-off event during Fakuma 2018 in Friedrichshafen, Germany, on 18 October.