06 December 2016
06 December 2016
OEMs and designers need to have peace-of-mind on the availability of reliable end-of-life solutions for the composite parts and components they create.
According to Aliancys, the recycling of composite regrind through co-processing into cement proves to be such a reliable solution, bringing substantial benefits in minimising carbon footprint. Aliancys is introducing its newest brochure, providing customers with insight into this recycling route and its positive impact on the environment.
Co-processing is the simultaneous use of composite regrind as raw material and as a source of energy in cement manufacturing, replacing natural mineral resources (material recycling) and fossil fuels such as coal, petroleum and gas (energy recovery). Aliancys explains that the co-processing process has been recognised by the EU Commission as recycling route for composites.
In 2012, Aliancys says it worked with cement manufacturer Holcim/Geocycle to better quantify the ecological benefits of using composite regrind for making cement. For this purpose, the companies used a detailed LCA model developed in close collaboration with the Swiss Federal Institute of Technology (ETH) in Zürch, Switzerland.
Aliancys explains that glass filled composite regrind can be used up to levels of 75 % of raw material weight in the process. Interestingly, it was calculated that at those levels the addition of composites allows reducing the CO2 emissions of the cement clinker production with 16 %. This is obviously a major reduction for a process that inherently generates fair amounts of CO2 because of the chemistry involved. Additional detail on study and results can be found in the new Aliancys brochure. Please click here to download a copy.
While recycling composites through co-processing may be viable solution from a technical, environmental and economic perspective, it does require a fair volume of composite regrind in order to have a stable and consistent raw material stream. Aliancys says a typical cement manufacturing plant produces 5000 tons of cement clinker per day. If half of that volume would be composite regrind, it translates to ~800 kT per year.
The current volume of composite regrind generated annually in Europe is estimated to be in the order of 80-100 kT. This assumes a 5 % waste in composite manufacturing processes (which may be on the high side), and an average composite component working life of 20 years (average across end-use applications). So for the short term, the composite regrind quantity available will only be used in a small number of cement manufacturing plants. Taking into account the backlog for processing old wind turbine blades and end-of-life boats, it can be expected that the composite end-of-life streams will further increase in the coming years.
Two companies in Europe are actively involved in the conversion at a larger scale of glass reinforced composite components into regrind. Neowa is collecting parts from Northern Germany and Denmark in its operation near Bremen,Germany, and combining the composite regrind with plastic and paper waste stream for achieving a constant caloric value. The company supplies the resulting mix to the nearby Holcim plant in Lägersdorf, Germany. In 2016 the volumes of composite regrind will be in the order or 9-10 kT.
In Moerdijk, Netherlands, Demacq has started operations in 2016, collecting composite components from a wide variety of sources in the Netherlands and Belgium (with the intent to expand collection to other parts of Europe). The company is planning to scale up in 2017 and will use the cement manufacturing route as primary outlet. Demacq has developed a proprietary technology for cutting large composite components on-site without major generation of dust.
“Aliancys is helping its customers to define routes for recycling process waste and for the end-of-live components returned to their source”, explains Fons Harbers, Marketing and Sales Director of Aliancys. “We believe that recycling should be an important consideration for designing new parts in composites. With the increased market activities for processing composite regrind into cement, we believe that this will create excellent conditions for industry growth.”
Photo provided by Aliancys
Water Jet Sweden's new T-model is a multi-purpose waterjet cutting machine designed for in-house production, part manufacturing, and design, engineering and prototype workshops. It can cut composites, metals, plastic, glass, stone and many other materials, up to 200 mm thick, with the same cutting tool.
Altair’s product development services division Altair ProductDesign has been awarded a 2016 Boeing Performance Excellence Award. Boeing issues the award annually to recognise suppliers which have achieved superior performance.
CGTech has announced the release of Version 8.0.2 of its VERICUT CNC machine simulation, verification and optimisation software.